Gold Science and Technology
img

Wechat

Adv. Search
Online Submission Peer Review Office Work

Gold Science and Technology ›› 2017, Vol. 25 ›› Issue (1): 121-126.doi: 10.11872/j.issn.1005-2518.2017.01.121

Previous Articles    

The Law of Grinding Gold-Containing Copper Sulfide Ores  Under Stone for Grinding Media

LEI Ali 1，WU Caibin 1，2，YE Jingsheng 1，JIANG Lingpei 1，NI Shuainan 1，HE Shuichun 1   

  1. 1.School of Resources and Environmental Engineering，Jiangxi University of Science and Technology，Ganzhou    341000，Jiangxi，China；
    2.Jiangxi Key Laboratory of Mining Engineering，Ganzhou    341000，Jiangxi，China
  • Received:2016-06-28 Revised:2016-12-19 Online:2017-02-28 Published:2017-05-12

PDF (PC)

545

Abstract:

The stone which is discharged from semi-autogenous mill is taken for grinding medium，to investigate the self-grinding abrasion law and product particle size distribution，stone grinding abrasion law and grinding mineral particle size distribution when the stone is   used as grinding medium .The results show that rocks since the wear of grinding fineness are below 0.125 mm under the condition of different grinding time，filling ratio and grinding concentration；When grinding stone as grinding medium，under the grinding conditions of filling rate is 50%，the concentration is about 60%，the grinding time is 19 min，the into grinding sample is 500 g ，it can obtain grinding with -45 microns content of 60%，the new born gamma -45 microns quantity of approximately 18%；Compared with a steel ball grinding mineral surface is covered by a large number of iron floc and severe corrosion，stone grinding particle surface with a small amount of floc when the stone as grinding medium，with no corrosion，the outline of the mineral formation is smooth and clean.Stone is a fine grinding process ideal grinding media.

Key words: semi-autogenous grinding stone, grinding medium, grinding, particle size distribution

CLC Number: 

  • TD453

［1］ Wang Zehong，Cai Shan，Deng Shanzhi，et al.Effect of grinding aids on the fracture energy of mica［J］.Metal Mine，2010（6）：80-84.［王泽红，蔡珊，邓善芝，等.助磨剂对云母破裂能的影响［J］.金属矿山，2010（6）：80-84.］
［2］ Duan Xixiang.Research of selective grinding application［J］.Yunnan Metallurgy，1990，19（3）：21-24.［段希祥.选择性磨矿的应用研究［J］.云南冶金，1990，19（3）：21-24.］
［3］ Liu Quanjun，Jiang Meiguang.Technological development of ore crushing and grinding and their current situation［J］.Yunnan Metallurgy，2012，41（5）：21-28.［刘全军，姜美光.碎矿与磨矿技术发展及现状［J］.云南冶金，2012，41（5）：21-28.］
［4］ Xie Minxiong，Wang Xiting.The performance analysis and evaluation of the grinding system in concentrator［J］.ChinaMine Engineering， 2010，39（2）：20-24，41.［谢敏雄，王夕亭.选矿厂磨矿系统效能分析与评判［J］.中国矿山工程，2010，39（2）：20-24，41.］
［5］ Cheng Xu，Wu Haojie，Wang Zehong.The research progress of effect on grinding media system on grinding process［J］.Metal Mine， 2013（9）：104-107.［程旭，武豪杰，王泽红.介质制度对磨矿过程影响的研究进展［J］.金属矿山，2013（9）：104-107.］
［6］ Cui Xueru，Liu Houqian，Li Mingdong.Relation between grinding medium and grinding efficiency［J］.Mining Engineering，2005，3（6）：35-37.［崔学茹，刘厚乾，李明东.磨矿介质与磨矿效率剖析［J］.矿业工程，2005，3（6）：35-37.］
［7］ Zhao Yudong.Application and development of mixing type mill［J］.Mining & Processing Equipment，2001，29（1）：18-20.［赵昱东.搅拌型磨矿机应用与发展［J］.矿山机械，2001，29（1）：18-20.］
［8］ Shi Guiming，Wu Caibin，Xiao Liang，et al.Experimental study of grinding system optimization for a tungsten polymetallic ore［J］.Nonferrous Metals Science and Engineering，2013，4（5）：79-84.［石贵明，吴彩斌，肖良，等.柿竹园钨多金属矿优化磨矿系统实验室研究［J］.有色金属科学与工程，2013，4（5）：79-84.］
［9］ Sun Guiji.Studies on improving grinding efficiency［J］.Gold，1989，10（10）：30-34.［孙贵吉.提高磨矿效率的探讨［J］.黄金，1989，10（10）：30-34.］
［10］ Hu Jianguo，Mao Shiyi.The way to raise grinding efficiency［J］.Jiangxi Nonferrous Metals，2002，16（2）：11-12，21.［胡建国，毛世意.浅谈提高磨矿效率的途径［J］.江西有色金属，2002，16（2）：11-12，21.］
［11］ Zhang Jinrui，Liang Bing，Zhao Libing.Technology development and trend on the grinding medium of the ball mill［J］.Non-Ferrous Mining and Metallurgy，2013，29（1）：42-45，54.［张锦瑞，梁冰，赵礼兵.球磨机机理与磨矿介质制度研究现状及发展趋势［J］.有色矿冶，2013，29（1）：42-45，54.］
［12］ Wang Peng.Research on application of grinding media to beneficiation  production［J］.Metal Mine，2010（1）：132-134.［王鹏.选矿磨矿介质生产研究应用的思考［J］.金属矿山，2010（1）：132-134.］
[1] LEI Xiaoli，LI Jinquan，XU Zhongmin，DUAN Xixiang. Application of the Technology of Accurate Ball Loading and Addition in Concentrating Mill of Jinchiling Gold Mine [J]. Gold Science and Technology, 2015, 23(6): 87-91.
[2] LIWei,WANG Baosheng, GAO Yongsheng. The Applica tion andMethod of Insta lla tion and Transforma tiona l of Ba llM ill [J]. J4, 2008, 16(6): 55-57.
[3] YAO Fushan. Application of Large Tower Mill in Cyanide Fine Grinding of Gold Concentrate [J]. Gold Science and Technology, 2014, 22(3): 82-85.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!

©2018 Gold Science and Technology　

Telephone：0931-8277791　

E-mail: hjkx@lzb.ac.cn Postcode：730000　

Powered by Beijing Magtech Co. Ltd

陇ICP备17001318号-1