收稿日期: 2016-06-12
修回日期: 2017-01-11
网络出版日期: 2017-09-11
Application Practice of Increasing Production and Reducing Consumption in Grinding System of Dayingezhuang Gold Mine
Received date: 2016-06-12
Revised date: 2017-01-11
Online published: 2017-09-11
针对大尹格庄金矿磨机处理能力、磨机效率以及旋流器分级效率偏低、球耗和电耗较高等问题,采用精确化装补球技术,进行磨矿试验研究并开展工业应用,取得了良好的增产降耗效果。研究结果表明:磨机小时处理能力增加5.01%,电耗下降7.88%,球耗下降6.84%;磨机效率分别提高9.16%和10.45%,旋流器分级量效率分别提高了4.94%和4.07%,分级质效率分别提高了3.51%和3.90%;入浮产品中-0.074 mm含量提高了0.52%,而-0.010 mm含量降低了3.5%,精矿品位和回收率均有提高。工业应用结果表明,该方法经济效益显著,具有推广应用的价值。
徐怀浩 , 李进友 . 大尹格庄金矿磨矿系统增产降耗的应用实践[J]. 黄金科学技术, 2017 , 25(3) : 116 -120 . DOI: 10.11872/j.issn.1005-2518.2017.03.116
Aiming at the problems of low grinding production capacity,low efficiency of mill,low classigication efficiency of cyclone,high consumption of steel ball and energy,grinding research and industrial applications were carried out in Dayingezhuang gold mine,by using the technology of accurate ball loading and addition,and a good effect of increasing production and reducing consumption was achieved.The results show that the production capacity of the mill increased by 5.01%,electricity consumption decreased by 7.88% and the grinding media consumption decreased by 6.84%.Mill efficiency increased by 9.16% and 10.45%,respectively.Cyclone classification efficiency has been increased by 4.94% and 4.07%,the mass transfer efficiency of cyclone classifier increased by 3.51% and 3.90% respectively.The -0.074 mm product of cyclone classification increased by 0.52%,-0.010 mm content reduced by 3.5%.Concentrate grade and recovery has been improved.The results indicated that the increasing production of mill has a remarkable economic benefit,so it has the value of popularization and application.
[1] Li Jinyou,Wang Shaolin,Xu Huaihao,et al.Application of auto- matic control of mineral processing in Dayingezhuang gold mine[J].Gold,2012,33(9):36-39 [李进友,王少林,徐怀浩,等.大尹格庄金矿选矿自动控制的应用[J].黄金,2012,33(9):36-39.]
[2] Lei Xiaoli,Li Jinquan,Xu Zhongmin,et al.Application of the technology of accurate ball loading and addition in con- centrating mill of Jinchiling gold mine[J].Gold Science and Technology,2015,23(6):87-91.[雷小莉,李金泉,徐忠敏,等.精确化装补球技术在金翅岭金矿选矿厂的应用[J].黄金科学技术,2015,23(6):87-90.]
[3] Duan Xixiang,Zhou Ping,Pan Xinchao.Accurate method for ball load and addition in mill[J].Nonferrous Metal,2004,56(3):75-78. [段希祥,周平,潘新潮.球磨机精确化装补球方法[J].有色金属,2004,56(3):75-78.]
[4] Guo Yongjie.Application of Precise Make-up Premium Ball Method in Non-standard Two Section of Ball Grinding Rubbing Flow[D].Kunming:Kunming Universtiy of Science and Technology,2009.[郭永杰.非标准两段球磨磨矿流程实施精确化装补球方法的应用研究[D].昆明:昆明理工大学,2009.]
[5] Luo Chunmei,Guo Yongjie,Duan Xixiang.Study on effect of accurate ball-load-addition method on dressing target[J].Mining and Metallurgy,2008,17(4):19-23.[罗春梅,郭永杰,段希祥.精确化装补球方法对选矿指标影响的研究[J].矿冶,2008,17(4):19-23.]
[6] Pan Xinchao.Study of Precise Make-up Premium Ball Method and Its Application[D].Kunming:Kunming Universtiy of Science and Technology,2003.[潘新潮.精确化装补球方法及应用研究[D].昆明:昆明理工大学,2003.]
[7] Xiao Qingfei,Shi Guiming,Luo Chunmei,et al.Further impro- vement of mill capacity in Shizishan copper mine by applying accurate ball charging[J].Mining and Metallurgical Engi- neering,2008,28(6):32-34.[肖庆飞,石贵明,罗春梅,等.进一步提高狮子山铜矿磨机生产能力的研究[J].矿冶工程,2008,28(4):32-34.]
[8] Xiao Qingfei,Li Guihai,Shi Guiming,et al.Application of accurate ball loading and addition in Shizishan copper mine[J].Metal Mine,2007(12):68-71.[肖庆飞,李桂海,石贵明,等.精确化装补球法在狮子山铜矿的应用[J].金属矿山,2007(12):68-71.]
[9] Wang Taiping,Xiao Qingfei,Li Bo,et al.Application research of accurate ball loading and addition in Dongguashan copper mine[J].Journal of Kunming University of Science and Techno- logy(Natural Science Edition),2015,40(4):23-27.[汪太平,肖庆飞,李博,等.精确化装补球制度在冬瓜山铜矿的应用研究[J].昆明理工大学学报(自然科学版),2015,40(4):23-27.]
[10] Kang Huaibin,Xiao Qingfei,Qin Hongxun,et al. Study on the application of accurate ball loading and addition in Dayingezhuang gold mine[J].Gold,2015,36(6):53-56.[康怀斌,肖庆飞,秦洪训,等.精确化装补球方法在大尹格庄金矿中的应用研究[J].黄金,2015,36(6):53-56.]
[11] Chang Fuqiang,Duan Dehua,Song Yan.The method of im- proving the grinding efficiency of ball mill in production[J].Morden Mining,2011(3):81-84.[常富强,段德华,宋龑.生产中提高球磨机磨矿效率的方法[J].现代矿业,2011(3):81-84.]
[12] Duan Xixiang.The Crushing and Grinding[M].Beijing:Metal- lurgical Industry Press,2006.[段希祥.碎矿与磨矿[M].北京:冶金工业出版社,2006.]
/
〈 |
|
〉 |