img

QQ群聊

img

官方微信

高级检索

黄金科学技术 ›› 2021, Vol. 29 ›› Issue (3): 392-400.doi: 10.11872/j.issn.1005-2518.2021.03.220

• 采选技术与矿山管理 • 上一篇    

不同张开度裂隙类岩体循环加卸载下滞回环特征与损伤变形分析

杨少峰(),蒲成志(),曾佳君,李益龙   

  1. 南华大学资源环境与安全工程学院,湖南 衡阳 421001
  • 收稿日期:2020-12-18 修回日期:2021-03-17 出版日期:2021-06-30 发布日期:2021-07-14
  • 通讯作者: 蒲成志 E-mail:2428867108@qq.com;puchengzhi@foxmail.com
  • 作者简介:杨少峰(1993-),男,山西运城人,硕士研究生,从事岩石断裂力学方面的试验研究工作。2428867108@qq.com
  • 基金资助:
    国家自然科学基金项目“水—力耦合作用下卸荷诱导的裂隙体破断实验与灾变机理研究”(51704168);湖南省自然科学基金青年项目“渗流场长时稳定作用的裂隙体破断实验与机理研究”(2019JJ50528)

Hysteresis Characteristics and Damage Deformation Analysis of Fractured Rock Mass with Different Crack Opening Under Cyclic Loading and Unloading

Shaofeng YANG(),Chengzhi PU(),Jiajun ZENG,Yilong LI   

  1. School of Resources Environment and Safety Engineering,University of South China,Hengyang 421001,Hunan,China
  • Received:2020-12-18 Revised:2021-03-17 Online:2021-06-30 Published:2021-07-14
  • Contact: Chengzhi PU E-mail:2428867108@qq.com;puchengzhi@foxmail.com

摘要:

为探究张开度和不同应力等级循环加卸载复合影响下裂隙岩体的损伤特性和裂纹演化规律,利用水泥砂浆制备不同张开度单裂隙类岩石材料,基于RMT-150B岩石力学试验机对类岩石材料开展了3种等级的应力循环加载试验,分析了裂隙类岩石材料的应力—应变曲线特征、滞回环面积变化规律、动弹性模量变化规律及损伤特性。试验结果表明:类岩石材料的强度随应力循环等级的增大而出现弱化现象,同时循环过程中加卸载曲线形成的滞回环由刚开始的“密集型”转为“稀疏型”;类岩石材料滞回环的面积随着循环次数的增大呈递减趋势,而滞回环面积随张开度的增大呈递增趋势;当循环应力和循环次数相同时,类岩石材料的动弹性模量随着张开度的增大呈递减趋势;随着应力循环等级的增大,类岩石材料的损伤变量随着循环次数的增加呈现为递减—缓慢增长—急剧增长趋势,且不同应力等级下裂纹的演化各不相同。

关键词: 裂隙张开度, 分级应力循环加卸载, 滞回环, 动弹性模量, 绝对损伤参数, 裂纹演化

Abstract:

In order to explore the damage characteristics and crack evolution law of fractured rock mass under the combined influence of opening and cyclic loading and unloading of different stress levels,four kinds of single fractured rock materials with different opening (0.1,0.2,0.4,0.8 mm) were prepared by cement mortar,and three kinds of cyclic stress loading tests were carried out on rock-like materials based on RMT-150B rock mechanics testing machine.The characteristics of stress-strain curves,hysteretic loop area,dynamic elastic modulus and damage of fractured rock materials were analyzed.The test results show that the three kinds of stress cyclic loading roughly correspond to the three stages of pore compaction,elastic deformation and stable propagation of microcracks,and the peak strength of rock-like materials decreases with the increase of cyclic stress grade,the phenomenon of strength weakening occurs,and the hysteresis loop changes from “dense” to “sparse” at the beginning.Under the condition of the same stress level,with the increase of the number of cycles,the hysteresis loop area decreases sharply at first and then tends to be stable.In addition,there is an obvious difference in the decrease of the hysteresis loop area with different crack openings,the smaller the crack opening is,the smaller decrease of the hysteresis loop area is.Under the same number of cycles,the hysteresis loop area increases with the increase of crack opening and cyclic stress grade,and in the same cyclic stress grade and crack opening,the dynamic elastic modulus increases sharply at first and then tends to a stable value with the increase of the number of cycles.When the cyclic stress level and cyclic times are the same,the dynamic elastic modulus of rock-like materials decreases with the increase of crack opening.Under the same crack opening and cycle times,the dynamic elastic modulus increases at first and then decreases with the increase of cyclic stress grade,and with the increase of stress cycle grade and cycle times,the damage variable of rock-like materials shows the trend of decreasing first,then slow growth and then sharp increase,corresponding to the change law of the transition of hysteretic loop from “dense” to “sparse”.And the crack evolution of rock-like materials is different in different cyclic stress levels.

Key words: crack opening, graded cyclic loading and unloading, hysteresis loop, dynamic modulus of elasticity, absolute damage parameter, crack evolution

中图分类号: 

  • TU452

图 1

裂隙岩体模型及实物"

图 2

改装后的RMT-150B伺服控制试验机"

图 3

循环加卸载方式"

表 1

试件的力学参数"

参数名称数值参数名称数值
密度ρ/ (kg·m-32 188黏聚力c/MPa9.51
单轴抗压强度σc/MPa55.52泊松比v0.22
单轴抗拉强度σt/MPa4.37内摩擦角φ/(°)34.65
弹性模量E/GPa8.62

图4

不同张开度裂隙倾角试件和完整试件的应力—应变关系曲线注:b为裂隙张开度,β为裂隙倾角"

图5

加卸载滞回环"

图6

滞回环面积与循环次数的关系曲线注:b为裂隙张开度"

图7

动弹性模量与循环次数的关系曲线注:b为裂隙张开度"

图8

绝对损伤参数与循环次数的关系曲线注:b为裂隙张开度"

图9

低应力循环等级下滞回环区间裂隙岩体裂纹演化图"

图10

中应力循环等级下滞回环区间裂隙岩体裂纹演化图"

图11

高应力循环等级下滞回环区间裂隙岩体裂纹演化图"

Bai Shihong,2015.Evolution of Fractured Rock Mass Energy and the Damage Characteristics Experimental Study Under Cyclic Loading[D].Chengdu:Chengdu University of Technology.
Cao K,Ma L,Wu Y,al et,2020.Cyclic fatigue characteristics of rock failure using infrared radiation as precursor to violent failure:Experimental insights from loading and unloading response[J].Fatigue & Fracture of Engineering Materials & Structures,44(2):584-594.
Deng Huafeng,Hu Yu,Li Jianlin,al et,2016.The evolution of sandstone energy dissipation under cyclic loading and unloading[J].Chinese Journal of Rock Mechanics and Engineering,35(1):2869-2875.
Eberhardt E,Stead D,Stimpson B,1999.Quantifying progressive pre-peak brittle fracture damage in rock during uniaxial compression[J].International Journal of Rock Mechanics and Mining Sciences,36(3):361-380.
Fu Bin,Zhou Zonghong,Wang Haiquan,al et,2016.Precursor information study on acoustic emission characteristics of marble under uniaxial cyclic loading-unloading[J].Journal of China Coal Society,41(8):1946-1953.
Hu Shengbin,Deng Jian,Ma Chunde,al et,2009.Experimental study of failure characteristics of rock containing flaw under cyclic loading[J].Chinese Journal of Rock Mechanics and Engineering,28(12):2490-2495.
Li J,Hong L,Zhou K,al et,2020.Influence of loading rate on the energy evolution characteristics of rocks under cyclic loading and unloading[J].Energies,13(15):4003.
Li Run,Jian Wenbin,2015.Experimental study on fatigue degradation of fractured rocklike specimens[J].Chinese Journal of Underground Space and Engineering,11(Supp.2):429-435.
Lin Yuanyuan,Li Run,2016.Experimental study on the fatigue of pre-fractured rock specimens under dynamic loading[J].Fujian Construction Science & Technology,(6):32-34.
Liu Yi,2020.Study on Mechanical Properties and Damage Law of T-shaped Cracked Sample Under Multi-level Cyclic Loading [D].Xi’an:Xi’an University of Technology.
Peng K,Zhou J,Zou Q,al et,2020.Effect of loading frequency on the deformation behaviors of sandstones subjected to cyclic loads and its underlying mechanism[J].International Journal of Fatigue,131:105349..
Pu Chengzhi,Yang Shijiao,Zhang Chunyang,2019.Fracture mechanism of fracture body affected by opening degree[J].Chinese Journal of Geotechnical Engineering,41(10):1836-1844.
Shen Yanjun,Yang Gengshe,Wang Ming,al et,2018.Experiments on the damage characteristics and fracture process of single-joint quasi-sandstone under the cyclic freezing-thawing and cyclic loading[J].Chinese Journal of Rock Mechanics and Engineering,37(3):709-717.
Tang J H,Chen X D,Dai F,2020.Experimental study on the crack propagation and acoustic emission characteristics of notched rock beams under post-peak cyclic loading[J].Engineering Fracture Mechanics,226:106890. DOI:10.1016/j.engfracmech.2020.106890.
doi: 10.1016/j.engfracmech.2020.106890
Tao Ronglong,2019.Mechanical Test Study of Fractured Coal Rock Mass Under Cyclic Loading[D].Hefei:Anhui University of Science and Technology.
Wang Shuhong,Wang Zihe,Wang Kaiyi,al et,2020.Evolution law of elastic modulus of sandstone with double fissures under cyclic loading[J].Journal of Northeast University(Natural Science Edition),41(2):282-286.
Wei Yuanlong,Yang Chunhe,Guo Yintong,al et,2015.Experimental investigation on deformation and fracture characteristics of brittle shale with natural cracks under uniaxial cyclic loading[J].Rock and Soil Mechanics,36(6):1649-1658.
Yang Fan,2014.Experiment Research on the Fracture Failure Mechanism of Pre-existing Cracks in Brittle Rock Under Cyclic Load [D].Chengdu:Chengdu University of Technology.
Yang H Q,Liu J F,Zhou X P,2017.Effects of the loading and unloading conditions on the stress relaxation behavior of pre-cracked granite[J].Rock Mechanics and Rock Engineering,50(6):1157-1169.
Yang Shengqi,Tao Yan,Tang Jinzhou,2020.Experimental study of triaxial strength and deformation of single jointed sandstone under cyclic loading[J].Journal of China University of Mining and Technology,49(5):819-825.
Zeng Jiajun,Zhang Zhijun,Pu Chengzhi,al et,2020.Fracture test and analysis of horizontal fissure rock-like specimens influenced by apertures[J].Chinese Journal of Geotechnical Engineering,42(3):523-532.
Zeng Z X,Kong L W,Wang J T,2019.The deformation and permeability of Yanji mudstone under cyclic loading and unloading[J].Journal of Mountain Science,16(12):2907-2919.
Zhan Keliang,Xue Junhua,Liu Zhixi,2019.Evolution laws of dissipated energy under rock cyclic loading and unloading[J].Safety in Coal Mines,50(3):49-52.
Zhang Yan,Li Jiangteng,2019.Study on fracture characteristics of marble under monotone and cyclic loading[J].Chinese Journal of Rock Mechanics and Engineering,(Supp.2):3313-3320.
Zhou Xiang,Li Jiangteng,2020.Crack propagation law of brittle rock mass under cyclic loading and unloading[J].Journal of Central South University(Natural Science Edition),51(3):724-731.
Zhu Ling,Pei Xiangjun,Cui Shenghua,al et,2019.Experimental study on cycle loading and unloading damage and strength characteristics of rocks with vein defects[J].Chinese Journal of Rock Mechanics and Engineering,38(5):900-911.
白仕红,2015.循环荷载下裂隙岩体能量演化及损伤特性试验研究[D].成都:成都理工大学.
邓华锋,胡玉,李建林,等,2016.循环加卸载过程中砂岩能量耗散演化规律[J].岩石力学与工程学报,35(1):2869-2875.
付斌,周宗红,王海泉,等,2016.大理岩单轴循环加卸载破坏声发射先兆信息研究[J].煤炭学报,41(8):1946-1953.
胡盛斌,邓建,马春德,等,2009.循环荷载作用下含缺陷岩石破坏特征试验研究[J].岩石力学与工程学报,28(12):2490-2495.
李润,简文彬,2015.含裂隙类岩试样疲劳劣化试验研究[J].地下空间与工程学报,11(增2):429-435.
林媛媛,李润,2016.动荷载下预设裂隙岩样疲劳实验研究[J].福建建设科技,(6):32-34.
刘毅,2020.分级循环荷载下丁字形裂隙试样的力学特性及其损伤规律实验研究[D].西安:西安理工大学.
蒲成志,杨仕教,张春阳,2019.张开度影响的裂隙体破断机制探讨[J].岩土工程学报,41(10):1836-1844.
申艳军,杨更社,王铭,等,2018.冻融—周期荷载下单裂隙类砂岩损伤及断裂演化试验分析[J].岩石力学与工程学报,37(3):709-717.
陶荣龙,2019.循环荷载下裂隙复合煤岩体力学试验研究[D].合肥:安徽理工大学.
王述红,王子和,王凯毅,等,2020.循环荷载下含双裂隙砂岩弹性模量的演化规律[J].东北大学学报(自然科学版),41(2):282-286.
魏元龙,杨春和,郭印同,等,2015.单轴循环荷载下含天然裂隙脆性页岩变形及破裂特征试验研究[J].岩土力学,36(6):1649-1658.
杨帆,2014.循环荷载下含裂隙脆性岩体破坏机理试验研究[D].成都:成都理工大学.
杨圣奇,陶焱,唐劲舟,2020.循环加载下单节理砂岩三轴强度与变形试验研究[J].中国矿业大学学报,49(5):819-825.
曾佳君,张志军,蒲成志,等,2020.张开度影响的水平裂隙类岩试件破断试验与分析[J].岩土工程学报,42(3):523-532.
詹可亮,薛俊华,刘之喜,2019.岩石循环加卸载作用下能量的演化规律[J].煤矿安全,50(3):49-52.
张琰,李江腾,2019.单调及循环加载下大理岩断裂特性研究[J].岩石力学与工程学报,(增2):3313-3320.
周详,李江腾,2020.循环加卸载条件下脆性岩体裂纹演化规律[J].中南大学学报(自然科学版),51(3):724-731.
朱凌,裴向军,崔圣华,等,2019.含脉状缺陷结构岩石循环加卸载损伤及强度特性试验研究[J].岩石力学与工程学报,38(5):900-911.
[1] 贺桂成, 陈科旭, 戴兵, 王程程. 十字交叉裂隙扩展机理试验与数值模拟研究[J]. 黄金科学技术, 2020, 28(4): 509-520.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!