img

QQ群聊

img

官方微信

高级检索

黄金科学技术 ›› 2013, Vol. 21 ›› Issue (4): 91-94.

• 冶炼技术与装备研发 • 上一篇    

氰化系统阶段提高金精矿磨矿细度的生产实践

杨建,王建平   

  1. 山东黄金矿业(莱州)有限公司三山岛金矿,山东  莱州   261442
  • 收稿日期:2013-03-31 修回日期:2013-06-25 出版日期:2013-08-28 发布日期:2014-01-26
  • 作者简介:杨建(1976-),男,山东莱州人,工程师,从事黄金选矿氰化技术管理工作.purple_life@126.com

The Production Practice about Improving Grinding Fineness of Gold Concentrate in Cyanide System Stage

YANG Jian,WANG Jianping   

  1. Sanshandao Gold Mine,Shandong Gold Mining (Laizhou) Co.,Ltd.,Laizhou   261442,Shandong,China
  • Received:2013-03-31 Revised:2013-06-25 Online:2013-08-28 Published:2014-01-26

摘要:

在氰化生产过程中,进入氰化系统的金精矿细度对浸出指标起着至关重要的作用。为了进一步提高氰化浸出率,在选矿厂生产实践中充分利用现有设备资源,通过采集和分析再磨及磨矿分级系统的相关数据,确定合理的工艺参数,优化调整球磨机转速、磨矿介质、旋流器参数和给矿排矿等一系列参数,分阶段提高入浸金精矿细度,最终使精矿细度-400目含量提高至90%以上,浸出回收率提高0.17%,达到了降低磨矿分级系统电力消耗、降本增效的目的。

关键词: 磨矿细度, 浸出回收率, 氰化系统, 金精矿

Abstract:

In the process of cyanide production,the gold concentrate fineness entranced the cyanide system is very important for leaching indicators.In order to improve the cyanide leaching rate,it is needed to make full use of existing equipment resources in the production practice of concentrator.Gather and analyze the related data of regrinding and grinding classification system,the reasonable process parameters have been determined.Optimized and adjusted to a series of parameters-milling rotational speed,grinding medium,cyclone parameters,and ore feeding and ore exhausting,to improve the gold concentrates fineness in stages.Finally,the content of gold concentrates fineness (400 meshes) increased up to more than 90%,and the leaching recovery rate increased by 0.17%.It has reached the purpose of reducing electricity consumption of the grinding classification system and cutting the cost to increase the profit.

Key words: grinding fineness, leaching recovery rate, cyanide system, gold concentrates

中图分类号: 

  • null

[1] 徐天允,徐正春.金的氰化与冶炼[M].沈阳:沈阳黄金学院,1985.
[2] 李启衡.碎矿与磨矿[M].北京:冶金工业出版社,1980.
[3] 丁培墉.物理化学[M].北京:冶金工业出版社,1979.
[4] 段希祥,曹亦俊.球磨机介质工作理论与实践[M].北京:冶金工业出版社,1999.
[5] 拜鹏程,何烨,陈芳芳,等.磨矿细度和二浸二洗对氰化浸出率影响的试验研究[J].黄金科学技术,2012,20 (5):71-73.
[6] 《选矿设计手册》编委会.选矿设计手册[M].北京:冶金工业出版社,1988.
[7] 杨家文.碎矿与磨矿技术[M].北京:冶金工业出版社,2006.
[8] 何烨,拜鹏程,黄冠银,等.酸浸提高金氰化浸出率的试验研究.黄金科学技术,2012,20 (6):58-61.
[9] 庞学诗.水力旋流器技术与应用[M].北京:中国石化出版社,2011.
[10] 周源.金银选矿与提取技术[M].北京:化学工业出版社,2011.
[11] 吴再民,幺金成.氰化法提金及高纯度金的提纯[J].黄金科学技术,2009,17(3):60-63.
[12] 陈芳芳,张亦飞,薛光.黄金冶炼污染治理与废物资源化利用[J].黄金科学技术,2011,19(2):67-73.
[13] 杨永斌.协同强化浸金的电化学动力学与应用研究[D].武汉:中南大学,2008.
[14] 李明军.提高姑山矿红矿系统磨矿效率的途径[J].现代矿业,2011,(10):64-65.
[15] 胡子龙,周建军.降低磨机转速增加经济效益[C]//2009年国内外水泥粉磨新技术交流大会论文集.北京:中国硅酸盐学会科普工作委员会,2009:93-97.
[16] 武俊杰,戴惠新.浅析磨矿过程的影响因素[J].云南冶金,2009,38(6):13-16.
[17] 曹丽霞.水力旋流器的研究进展[J].安徽化工,2009,35(4):17-19.
[18] 王鹏.矿磨矿介质生产研究应用的思考[J].金属矿山,2010,(1):132-134.

[1] 王成钊,李培峨,杜成波,张春亮,刘云岗,刘玉臻. HLX5型液压凿岩机的技术改造及应用[J]. 黄金科学技术, 2013, 21(4): 75-78.
[2] 《黄金科学技术》. 2012年第6期目次[J]. 黄金科学技术, 2012, 20(6): 0-0.
[3] 杨晓鸿. 贡果亚陇地区金锑矿成矿前景及其找矿意义[J]. J4, 2010, 18(6): 38-41.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!