img

Wechat

  • CN 62-1112/TF 
  • ISSN 1005-2518 
  • Founded in 1988
Adv. Search

An Optimization Test Study for Milling-classification Operation System of a Poor Sulphur Gold Ore Concentrating Plant in Qinghai Province

  • WU Caibin ,
  • YANG Hao ,
  • ZHOU Yichao ,
  • YAN Faming ,
  • ZHAO Ruquan ,
  • ZHAO Jieming ,
  • LIU Yu
Expand
  • 1.Jiangxi Key Laboratory of Mining Engineering,Jiangxi University of Science and Technology,Ganzhou   341000,Jiangxi,China;
    2.Changsha Institute of Mining and Metallurgy Co.,Ltd.,Changsha    410012,Hunan,China

Received date: 2015-05-25

  Revised date: 2015-07-01

  Online published: 2015-11-16

Abstract

Because the grinding ball is big and operating parameters are not reasonable in the the sulfur gold ore dressing plant of Qinghai Province,grinding efficiency is low in milling-classification operation system,the capacity is smaller and grinding fineness is bad.Based on the previous test in the laboratory and the calculation of the half-theory formula,the ball and ratio are determined.The JKsimMet soft is taken to simulate industrial test process to find the best operating parameters in milling-classification operation system and make industrial test.Good practice dictates that the JKsimMet soft can simulate the milling-classification operation and get a better result that provide a guidance for industrial experiment,the conclusions are obtain that the capacity of primary grinding increases by 6.5 t/h,metal consumption reduces by 14.29%,grinding fineness adds by 27.9%,P80 drops by 60.91%.The fineness grinding of the secondary raises by  31.3%.P80 cuts down 13.31%.The grinding efficiency is improved and the capacity is increased.Milling-classification operation system is better.

Cite this article

WU Caibin , YANG Hao , ZHOU Yichao , YAN Faming , ZHAO Ruquan , ZHAO Jieming , LIU Yu . An Optimization Test Study for Milling-classification Operation System of a Poor Sulphur Gold Ore Concentrating Plant in Qinghai Province[J]. Gold Science and Technology, 2015 , 23(4) : 30 -34 . DOI: 10.11872/j.issn.1005-2518.2015.04.030

References

[1]  姜杨,李明宇,梅志强,等.提高红透山矿选矿厂磨矿效率途径探讨[J].有色矿冶,2014,30(5):29-31.
[2] 王虎,刘洋,秦香伟,等.中矿再磨及流程改造提高金精矿品位的实践[J].黄金科学技术,2014,22(6):55-59.
[3] 石贵明,吴彩斌,肖良,等.柿竹园钨多金属矿优化磨矿系统实验室研究[J].有色金属科学与工程,2013,4(5):79-84.
[4] 罗春梅.球磨机节能降耗新途径机理及应用研究[D].昆明:昆明理工大学,2009.
[5] 代岩,刘江峰,朱建群.哈西亚图金矿选矿综合回收利用研究[J].黄金科学技术,2014,22(6):50-54.
[6] 段希祥.球磨机钢球尺寸的理论计算研究[J].中国科学(A 辑),1989,19(8):856-863.
[7] 段希祥.球径半理论公式的修正研究[J].中国科学(E辑),1997,27(12):510-515.
[8] 石贵明,肖庆飞,罗春梅,等.球径精确化对选矿指标的影响研究[J].金属矿山,2007,(1):55-57
[9] 肖庆飞,罗春梅,石贵明,等.狮子山铜矿选矿增产节能降耗应用实践[J].矿业研究与开发,2009,29(5):57-59.
[10] 吴彩斌,刘瑜,周意超,等.低金高硫铜矿石回收金选矿试验研究[J].黄金科学技术,2014,22(5):76-77.
[11] Morrison R D,Richardson J M.JKsimMet-asimulator for analysis,optimasation and design of comminution circuits[C]//Mineral Processing Plant Design,Practice and Control Conference,Vancouver,B C.,Canada.New York:Society for Mining,Metallurgy and Exploration,2002:442- 460.
[12] Lynch A J.Mineral Crushing and Grinding Circuits:Their Simulation,Optimization Design and Control[M].New York:Elsevier,1977.
[13] Napier-Munn T J,Morrell S,Morrison R D,et al.Mineral Comminution Circuits:Their Operation and Optimization[M].Bris-bane:Julius Kruttschnitt Mineral Research Centre,University of Queensland,1996.
[14] 张艳华.某大型斑岩钼矿矿石碎磨特性试验研究与应用[J].中国矿山工程,2013,42(4):17-36.
[15] 孙忠梅.利用JKsimMet模拟软件对磨矿分级作业优化分析[J].有色设备,2014,(5):1-5.
[16] Chibwe P,Simukanga L K,Witika L K.Designing and testing the representative samplers for sampling a milling circuit at Nkana copper/cobalt concentrator[J].African Journal of Science and Technology,2005,6(2):102-112.
[17] Genc O.Optimization of a fully air-swept dry grinding cement raw meal ball mill closed circuit capacity with theaid of simulation[J].Minerals Engineering,2015,74:41-50.
[18] Irannajad M,Farzanegan A,Razavian S M.Spreadsheet-based simulation of closed ball milling circuits[J].Minerals Engineering,2006,19(15):1495-1504.
[19] Samanli S,Cuhadaroglu D,Kizgut S.A simulation study of laboratory scale ball and vertical stirred mills[J].Particle and Particle Systems Characterization,2009,26(5):256-264.
 
Outlines

/