img

Wechat

Adv. Search

Gold Science and Technology ›› 2014, Vol. 22 ›› Issue (1): 56-59.doi: 10.3969/j.issn.1005-2518.2014.01.056

Previous Articles     Next Articles

The Optimization of Mining Method Scheme for Gentle Dip and Filminess Ore Body

DING Mingfei,WANG Zhuo,WANG Dawei,WANG Sihong,LIU Yuyong,QIN Weili   

  1. Jiaojia Gold Mine,Shandong Gold mining(Laizhou)Co.,Ltd.,Laizhou   261441,Shandong,China
  • Received:2013-07-18 Revised:2013-10-23 Online:2014-02-28 Published:2014-06-25

Abstract:

It is remain an enormous and difficult problem to improve the efficiency of stoping the gentle dip and filminess ore body.If the resuming fill is applied to stope ore body according to the conventional rules,it will lead to lower efficiency and higher loss impoverishment rate,especially,the slip of mine system arrangement can not effectively solve the problem for gentle dip and filminess ore body.Aiming at the problem above,thus the resuming-fill mining method is optimized.Using the chute instead of sneaking underground ore,both sides of the chute with rubble wall,all of which can make the staff enter the chute to solve the blocking phenomenon,additionally,it improves the mining efficiency.Making use of cemented backfilling materials filling in caving on the basis of rubble,and playing a layer with enough strength of cementation plane can not only reduce the dilution loss rate,but also greatly improve the efficiency of ore mining.These optimization measures have been widely applied in Wangershan sub-ore of Jiaojia gold mine,which has brought good economic benefit for the mine.

Key words: resuming fill, gentle dip and filminess ore body, chute

CLC Number: 

  • TD853.21

[1] 薜田喜.山东焦家金矿生产技术开发研究进展[J].黄金科学技术,2010,18(2):67-69. 
[2] 杨官涛,袁梅芳.缓倾斜薄矿脉机械化开采新技术及工程实践[J].矿业研究与开发,2013,33(3):1-3,25. 
[3] 郭旺.缓倾斜薄矿体采矿方法创新设计与采动损伤过程模拟[D].长沙:中南大学,2012.
[4] 品垒.缓薄矿体盘区组合机械化开采方法优化研究[D].武汉:武汉科技大学,2010.  
[5] 王彦玮,张忠辉,邱俊刚,等.山东望儿山金矿地表沉陷数值模拟研究[J].黄金科学技术,2011,19(3):72-76. 
[6] 冷寒松,邓尧增,胥华龙,等.有底柱分段崩落采矿法在焦家金矿的研究与应用[J].黄金科学技术,2010,18(4):66-57.
[7] 贾洪杰,常海龙.削壁充填采矿法在金厂沟金矿的应用实践[J].黄金,2001,22(1):33-35.
[8] 陈其府.福建安村金矿削壁充填采矿方法探讨[J].采矿技术,2008,8(6):7-8.
[9] 祁保明.急倾斜极薄矿体削壁留矿法[J].有色金属,1997,(4):16-18.
[10] 王来军,薛田喜,陈涛,等.缓倾斜薄矿体采矿方法的研究[J].黄金科学技术,2003,11(3):44-47.
[11] 张运良.极薄矿脉采矿方法实验总结[J].江西有色金属,1992,6(3):170-174.
[12] 于金吾.现代矿山采矿新工艺、新技术、新设备与强制性标准规范全书[M].北京:当代中国音像出版社,2005.
[13] 赖伟,肖木恩,李文明.削壁充填法在开采极薄矿脉中的应用[J].采矿技术,2011,11(3):9-11.
[14] 解世俊.金属矿床地下开采[M].北京:冶金工业出版社,1979.

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!