img

Wechat

Adv. Search

Gold Science and Technology ›› 2020, Vol. 28 ›› Issue (3): 345-352.doi: 10.11872/j.issn.1005-2518.2020.03.026

• Mining Technology and Mine Management • Previous Articles     Next Articles

Research on Destress Effect of Ground Pressure Control for the Time-space Mining Sequence at Depths

Shibo YU1,2,3(),Xiaocong YANG1,2,3(),Ye YUAN1,3,Zhixiu WANG1,3   

  1. 1.BGRIMM Technology Group,Beijing 102628,China
    2.School of Civil and Resource Engineering,University of Science and Technology Beijing,Beijing 100083,China
    3.National Centre for International Research on Green Metal Mining,Beijing 102628,China
  • Received:2019-12-31 Revised:2020-03-10 Online:2020-06-30 Published:2020-07-01
  • Contact: Xiaocong YANG E-mail:yushibo@bgrimm.com;yxcong@bgrimm.com

Abstract:

The regional time-space mining sequence is one of the important strategic methods for underground pressure management at depths and destress mechanical effect is closely related to the time-space mining sequence itself. Aiming at the large-area mining mechanical model of three-dimensional mining sequence from the centre to the periphery at depths, based on the stress transfer process and characteristics of rockburst stress hazard, the stress evolution laws and changes of rockburst stress hazard were studied during the mining process from a single stop to multiple stopes.The research results show that the three-dimensional mining sequence from the center to the periphery at depths can gradually realize the gradual transfer of high stress and the gradual transition of stress hazard around the mining operation area.The destress effect of ground pressure control for the time-space mining sequence at depths is to achieve the desired destress environment reconstruction and the progressive transfer of the stress hazard through the reasonable setting of the three-dimensional mining sequence.The mutual feedback analysis technology based on the combination of numerical simulation and microseismic monitoring could realize high integration of large area numerical simulation and big data of microseismic monitoring, real-time dynamic analysis and tracking evaluation, and it is an effective method to evaluate the destress effect of ground pressure control for the time-space mining sequence at depths.The essence of the destress effect of ground pressure control for the time-space mining sequence at depths is the idea to actively create low stress destress zone in the high-stress environment.This idea had been applied at Nickel Rim South mine in Canada, which had achieved a good destress effect and realized reasonable management for ground control. It is believed that this idea has important guiding significance for deep and ultra-deep mining in China.

Key words: deep region, stress migration, time-space mining sequence, numerical simulation, rockburst stress hazard, destress

CLC Number: 

  • TD853
1 Hedley D G F. Rockburst Handbook for Ontario Hardrock Mines[R].Ottawa:Minister of Supply and Services Canada,1992.
2 谢和平,高峰,鞠杨. 深部岩体力学研究与探索[J]. 岩石力学与工程学报,2015,34(11):2162-2178.
Xie Heping,Gao Feng,Ju Yang.Research and development of rock mechanics in deep ground engineering[J]. Chinese Journal of Rock Mechanics and Engineering,2015,34(11):2162-2178.
3 谢和平. “深部岩体力学与开采理论”研究构想与预期成果展望[J]. 工程科学与技术,2017,49(2):1-16.
Xie Heping. Research framework and anticipated results of deep rock mechanics and mining theory[J]. Advanced Engineering Sciences,2017,49(2):1-16.
4 何满潮,谢和平,彭苏萍,等. 深部开采岩体力学研究[J]. 岩石力学与工程学报,2005,24(16):2803-2813.
He Manchao,Xie Heping,Peng Suping,et al.Study on rock mechanics in deep mining engineering[J].Chinese Journal of Rock Mechanics and Engineering,2005,24(16):2803-2813.
5 于世波,吴春平,王志修,等. 深井复杂地质条件下综合采掘技术研究与应用[R]. 北京:北京矿冶科技集团有限公司,2018.
Yu Shibo,Wu Chunping,Wang Zhixiu,et al.Research and application of comprehensive mining technology under complex geological conditions at depths[R]. Beijing:BGRIMM Technology Group,2018.
6 胡建华,雷涛,周科平,等. 基于采矿环境再造的开采顺序时变优化研究[J]. 岩土力学,2011,32(8):2517-2522.
Hu Jianhua,Lei Tao,Zhou Keping,et al.Time-varying optimization study of mining sequence based on reconstructed mining environment[J]. Rock and Soil Mechanics,2011,32(8):2517-2522.
7 刘晓明,杨承祥,罗周全. 深井开采回采顺序数值模拟优化研究[J]. 南华大学学报(自然科学版),2008,22(4):15-21.
Liu Xiaoming,Yang Chengxiang,Luo Zhouquan.Numerical simulation optmization of mining sequence in deep mining[J].Journal of University of South China (Science and Technology),2008,22(4):15-21.
8 卢萍. 深部采场结构参数及回采顺序优化研究[D]. 重庆:重庆大学,2008.
Lu Ping.Optimization of Deep Stope Structure Parameters and Mining Sequence[D]. Chongqing:Chongqing University,2008.
9 戴兴国,唐凌,陈增剑,等. 基于λ模糊测度和Choquet积分的回采方案动态优选[J]. 黄金科学技术,2016,24(2):1-7.
Dai Xingguo,Tang Ling,Chen Zengjian,et al.Dynamic optimization of stoping scheme based on λ fuzzy measure and Choquet integral[J].Gold Science and Technology,2016,24(2):1-7.
10 邓红卫,杨懿全,邓畯仁,等. 采空区下方高应力环境下深部矿体回采时序研究[J]. 黄金科学技术,2017,25(2):62-69.
Deng Hongwei,Yang Yiquan,Deng Junren,et al. Study on mining sequence of deep orebody under high stress environment below goaf[J]. Gold Science and Technology,2017,25(2):62-69.
11 Morissette P,Hadjigeorgiou J,Punkkinen A.Characterisation of burst-prone grounds at Vale’s Creighton Mine[J]. Mining Technology,2017,126(3):123-138.
12 Stacey T R,Page C H.Practical Handbook for Underground Rock Mechanics[M].Clausthal-Zellerfeld:Trans Tech Publications,1986.
13 Wiles T. Loading system stiffness—A parameter to evaluate rockburst potential[C]//Hudyma M,Potvin Y. Proceedings of the First International Seminar on Deep and High Stress Mining.Perth:Australian Centre for Geomechanics,2002.
14 Cotesta L,O’connor C P,Brummer R K,et al. Numerical modelling and scientific visualisation—Integration of geomechanics into modern mine designs[C]//Hudyma M,Potvin Y.Proceedings of the Seventh International Seminar on Deep and High Stress Mining.Perth:Australian Centre for Geomechanics,2014.
15 Ryder J A. Excess shear stress in the assessment of geologically hazardous situations[J]. Journal of the South African Institute of Mining and Metallurgy,1988,88(1):27-39.
16 Itasca Consulting Group Inc.. FLAC3D,version 6.0[CP/DK]. Itasca Consulting Group,Inc.,2017.
17 MAP3D International Ltd.MAP3D,version 65[CP/DK]. MAP3D International Ltd.,2017.
18 Woodward K R,Tierney S R. Seismic hazard estimation using databases with bimodal frequency-magnitute beha-viour[C]// Hudyma M,Potvin Y. Proceedings of the First International Conference on Underground Mining Technology.Perth:Australian Centre for Geomechanics,2017.
19 Dineva S,Boskovic M. Evolution of seismicity at Kiruna Mine[C]//Wesseloo J. Proceedings of the Eighth International Seminar on Deep and High Stress Mining.Perth:Australian Centre for Geomechanics,2017.
20 Carusone O T S. Interpretation of Rock Mass Yield Using Apparent Stress of Microseismic Events—Examples from Glencore’s Nickel Rim South Mine,Sudbury,Ontario[D].Ontario:Laurentian University,2018.
[1] Xingxin NIE, Quan GAN, Jian GAO, Shanshan FENG. Research on Safety Roof Span in Continuous Mining of Gold Vein Group Under Synergistic Concept [J]. Gold Science and Technology, 2020, 28(3): 337-344.
[2] Yongyuan KOU, Guang LI, Long ZOU, Fengshan MA, Jie GUO. Study on Mining Method of Horizontal Pillar in the Middle Section of +1 000 m in Jinchuan No.2 Mining Area [J]. Gold Science and Technology, 2020, 28(3): 353-362.
[3] Rui HUANG,E WU,Lin WU. Study on the Influence of Altitude on Smoke Propagation Law in Mine Roadway Fire [J]. Gold Science and Technology, 2020, 28(2): 293-300.
[4] Long TIAN,Zhiyong ZHOU,Jianhong CHEN. Numerical Simulation of Temperature Distribution in Mining Area of High Temperature Mine with Auxiliary Ventilation [J]. Gold Science and Technology, 2020, 28(1): 61-69.
[5] Qinli ZHANG,Chaoyu JIANG,Xiang GAO,Bin LIU. Study on Optimization of Structural Parameters of Hexagonal Mining Method with Large Cross-section [J]. Gold Science and Technology, 2020, 28(1): 42-50.
[6] Yuan GAO,Qingfa CHEN,Tenglong JIANG. Research on Three-Dimensional Numerical Model Construction Method and Cemented Filling Treatment of Complex Cavities in Daxin Manganese Mine [J]. Gold Science and Technology, 2019, 27(6): 851-861.
[7] Jun TIAN, Jianpo LIU, Yong YANG, Changyin ZHANG. Study on the Failure Law of Backfill Induced by Blasting Disturbance During Cut and Fill Mining Process [J]. Gold Science and Technology, 2019, 27(5): 687-695.
[8] Enxiang SONG, Qiang LI, Jing ZHANG, Kang PENG. Research and Application of Artificial False Bottom in Mining of Orebody in Alteration Zone [J]. Gold Science and Technology, 2019, 27(5): 722-730.
[9] Shijiao YANG,Zhihui WANG. Numerical Simulation on Stability of Shallow-buried Goaf Group with Overlying Highway [J]. Gold Science and Technology, 2019, 27(4): 505-512.
[10] Rui LIANG,Ruili YU,Wenhai ZHOU,Xiaobin HUANG,Jianyong WANG,Zhengyu XIONG. Application of Air Interval Charge Blasting Model in Mining Room [J]. Gold Science and Technology, 2019, 27(3): 358-367.
[11] Shikang QIN,Qingfa CHEN,Tingchang YIN. Connotation Differences and Research Progress of the Freeze-Thaw Damages of Rock and Rock Mass [J]. Gold Science and Technology, 2019, 27(3): 385-397.
[12] Feng LIU,Zhaokun WANG,Fengshan MA,Bo WANG,Jianbo WANG,Chunlei DONG. Current Situation and Prospect of Destressing Techniques in Deep Mine [J]. Gold Science and Technology, 2019, 27(3): 425-432.
[13] Chun WANG,Cheng WANG,Zuqiang XIONG,Luping CHENG,Huaibin WANG. Deformation Characteristics of the Surrounding Rock in Deep Mining Roadway Under Dynamic Disturbance [J]. Gold Science and Technology, 2019, 27(2): 232-240.
[14] Chuanfeng FANG,Jinmiao WANG,Shanbing LI,Mingtao JIA. Numerical Simulation Research of Natural Caving Method Based on PFC2D-DFN [J]. Gold Science and Technology, 2019, 27(2): 189-198.
[15] Nao LV,Haibo WANG. Numerical Simulation of Collapse Disaster Before and After Weakening of Thick and Hard Roof [J]. Gold Science and Technology, 2019, 27(2): 257-264.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] ZHANG Wen-Zhao, XU Shu-Beng. Gold Metallogenic Features and Prospecting Targets of the Zhao-ping Fault Zone[J]. J4, 2006, 14(2): 1 -10 .
[2] HUANG Zhongjun,WANG Guichun,GAO Rong. The Geological Characteristics and Prospecting of Ajile Gold and Ploymetallic Mine in Dongwuqi , Inner Mongolia[J]. J4, 2011, 19(3): 22 -29 .
[3] XU Huan,DOU Hongwei,ZHANG Zhenghu,ZHANG Zhiqiang. The Geological Features of Prospecting Indicator in Elashankou Silver-Lead-Zinc Deposit,Qinghai Province[J]. J4, 2012, 20(1): 71 -77 .
[4] CHEN Fangfang,ZHANG Yifei,XUE Guang. Disposal to Pollution and Resource Utilization to Waste for Gold Smelting[J]. J4, 2011, 19(2): 67 -73 .
[5] WANG Jiqing,WANG Ping,ZHAO Xiaojuan,LIN Xiangwei. Study and Apply on Comprehensive Recovery of Tailing Ore of Gold Flotation[J]. J4, 2010, 18(5): 87 -89 .
[6] HE Qiuli,ZHANG Hongchen,SONG Peng,ZHANG Zongchao,GUO Yaojia,WANG Likao,WU Peng. Geological Characteristics and Prospecting Criteria of  Paoli Carlin-Type Gold Deposits in Guangxi Province[J]. Gold Science and Technology, 2013, 21(6): 48 -52 .
[7] YANG Bao-Rong, YANG Xiao-Bin. Geological Characteristics and Ore-Controlling Factors of the Guoluolongwa Gold deposit,Doulan County,Qinghai Province[J]. J4, 2007, 15(1): 26 -30 .
[8] . [J]. Gold Science and Technology, 0, (): 0 .
[9] ZHOU Kun,ZHENG Liming. Application of the Nearest Neighbor Method in Delineation of Noble Metal Ore:Taking a Layered Platinum Ore in South Africa as an Example[J]. Gold Science and Technology, 2013, 21(3): 55 -58 .
[10] XIE Minxiong,LI Zhengyao,LIN Shuyong,CHI Xiaopeng,QI Chuanduo. Research on the Technology Innovation and Application of Improving Performance of Grinding System in Concentrator [J]. Gold Science and Technology, 2012, 20(6): 65 -68 .