img

Wechat

Adv. Search

Gold Science and Technology ›› 2019, Vol. 27 ›› Issue (1): 33-40.doi: 10.11872/j.issn.1005-2518.2019.01.033

Previous Articles     Next Articles

Application of CSAMT Method in Depth and Peripheral Prospecting of Cangshang Gold Deposit

Xinxin FENG,Qingqing DONG   

  1. 1. Shandong Gold Geology and Mineral Resources Co. ,Ltd. ,Laizhou 261400,Shandong,China
  • Received:2018-05-08 Revised:2018-09-06 Online:2019-02-28 Published:2019-03-19

Abstract:

There are abundant gold resources in Jiaodong area, which are mainly controlled by Sanshandao-Cangshang fault, Jiaojia fault and Zhaoping fault.Three major gold metallogenic belts were formed in the area, where several large and super-large gold deposits have been found. Jiaodong area has provided a large amount of gold reserves, and it’s an significant gold concentration area and gold industrial base in China.The main research area in this paper is Cangshang gold deposit,which located in southwest of Sanshandao-Cangshang fault that adjacent to the Bohai Bay.It is one of the large open-air gold deposit in China. Since Cangshang gold deposit closure in 2005,Shandong Gold Group,many geological exploration agencies and scientific research institutes have conducted a lot of prospecting work around the mine,but no new progress has been made in prospecting.In order to find out the spatial distribution of the fault and rock mass in the depth and periphery of the mining area,and search for deep gold resources, geophysical exploration method was used to conduct deep exploration in the area,and the conventional electrical and magnetic exploration was compared with CSAMT (Controlled Source Audio-Frequency Magnetotellurics).The conventional electric and magnetic exploration is difficult to meet the needs of exploration because the the depth of conventional electric and magnetic exploration is relatively shallow,and the results are reflected on the plane.CSAMT was choose to conduct deep profile exploration in the area.Field construction was carried out in the northern part of the mining area, and two CSAMT sounding sections were arranged along the vertical direction of the Cangshang fault,numbered L4000 and L4300. The length of L4000 section was 1 440 m,and L4300 section was 1 160 m,line distance was 300 m,point distance was 40 m and azimuth angle was 120°.The emission dipole sources AB were arranged in parallel lines in the northeast.The dipole distance of AB was 1.2 km, the receiving dipole distance of MN was 40 m,the receiving and transmitting distance was 5 km, and the detection depth was 1 km.The frequency acquisition range was 1~7 680 Hz,with a total of 40 frequency points.In order to ensure the quality of data acquisition and reduce human interference,a 21 KAV high-power generator was used for power supply.The low frequency current (1 Hz) was not less than 18 A,the high frequency current (7 680 Hz) was not less than 5 A,and the current at intermediate frequency was decreasing.Data processing and inversion were carried out by using software CMTPro and CSAMT-SW V3.0.The data processing included data preprocessing,trip point removal,near-field source correction,static correction and two-dimensional joint inversion.Finally,a map was drawn and the inversion results were compared and analyzed comprehensively with previous geophysical prospecting data and geological profile 331.The inversion results of CSAMT showed that the resistivity characteristics of strata and rock mass were basically consistent with those of conventional electrical methods, and the inferred fault F1 was consistent with Sanshandao-Cangshang fault,indicating that this method has good application effect in this area.In order to verify the low-resistance abnormal zone (F1 fault),a verification borehole was deployed at the corresponding surface location.Through the verification of drilling project,fault mud,weak sericitization granite cataclastic rocks,cataclastic granite rocks and sericitization granite cataclastic rocks were found at the depth of 776.25 ~829.70 m,corresponding to the low-resistance abnormal zone (F1 fault).Gold orebodies were found in sericitization granitic cataclastic rocks,the highest grade is 7.30×10-6 after assay.In summary,good prospecting results are achieved while applying to the field geological exploration work,and will provide valuable geophysical information basis for further geological prospecting.

Key words: CSAMT, gold orebody, geophysical information, deep prospecting, Cangshang gold deposit, Sanshandao-Cangshang fault

CLC Number: 

  • P618.51

Fig.1

Geological diagram of Sanshandao-Cangshang fault zone[6]"

Fig.2

Plane isoline map of ?T in north of Cangshang gold deposit"

Fig.3

Plane isoline map of apparent resistivity in north of Cangshang gold deposit"

Fig.4

Layout plan of CSAMT launch and observation system"

Table 1

Physical property statistics in the north of Laizhou"

岩性标本数/个电阻率ρ/(Ω·m)
平均值变化范围
斜长角闪岩5232893~749
二长花岗岩96810490~1 167
绢英岩化花岗质碎裂岩741 200335~8 180
黄铁绢英岩化糜棱岩3086.941.5~209
第四系(砂土层)196030~90

Fig.5

Diagram of CSAMT measure point location and inferred results"

Fig.6

Comparison diagram of CSAMT resistivity inversion profile and No.331 geological section"

Table 2

Geological layering and lithology of ZK319-1"

序号分层情况岩性
分层范围/m层厚/m
10.00~41.0041.00第四系海积砂及海泥
241.00~52.7011.70变辉长岩
352.70~767.20714.40混合岩化变辉长岩
4767.20~776.259.05碎裂状二长花岗岩
5776.25~776.450.20断层泥
6776.45~783.256.80弱绢英岩化花岗碎裂岩
7783.25~809.9026.65碎裂状花岗岩
8809.90~829.7019.80绢英岩化花岗质碎裂岩
9829.70~850.7021.00二长花岗岩

"

序号样品编号采样位置/m样长/mw(Au)/(×10-6
1H13778.65~779.851.200.63
2H15781.05~782.251.201.53
3H26818.60~819.801.201.53
4H27819.80~821.001.200.10
5H28821.00~822.201.207.30

Table 4

Application effect of geophysical prospecting method in the north of Cangshang"

物探方法地球物理特征应用效果
上盘(变质岩)仓上断裂下盘(花岗岩)
高精度磁测高磁特征条带状低磁带低磁特征不受海滨砂土地影响,成果主要反映在平面上,地球物理特征与地质吻合,应用效果较好,但探测深度较浅
常规电法(激电中梯面积测量)低阻特征电阻率梯度带高阻特征受海滨砂土地影响较小,成果主要反映在平面上,地球物理特征与地质吻合,应用效果较好,但探测深度较浅
CSAMT测量-400 m以浅为中低阻特征,以深为中高阻特征电阻率梯度带及条带状低阻区高阻特征受海滨砂土地影响较小,成果主要反映在垂向上,不同深度地层及岩体的地球物理特征,与地质相吻合,应用效果较好,且探测深度较深,可达2 000 m
1 王光杰,王勇,李帝铨,等.基于遗传算法CSAMT反演计算研究[J].地球物理学进展,2006,21(4):1285-1289.
WangGuangjie,WangYong,LiDiquan,et al.The application of genetic algorithm to CSAMT inversion[J].Progress in Geophysics,2006,21(4):1285-1289.
2 喻春,陈永凌,李建忠,等.可控源音频大地电磁法在高楼山金矿深部找矿中的应用[J].黄金科学技术,2016,24(1):59-63.
YuChun,ChenYongling,LiJianzhong,et al.Application of CSAMT to deep mine prospecting in the Gaoloushan gold mine[J].Gold Science and Technology,2016,24(1):59-63.
3 杨炳南,周琦,杜远生,等.音频大地电磁法对深部隐伏构造的识别与应用:以贵州省松桃县李家湾锰矿为例[J].地质科技情报,2015,34(6):26-32.
YangBingnan,ZhouQi,DuYuansheng,et al.Identification and application of audio magnetotellurics to the deep buried structure:A case study of Lijiawan manganese deposit at Songtao County in Guizhou Province[J].Geological Science and Technology Information,2015,34(6):26-32.
4 郑振云,轩慎英,郑洁,等.可控源音频大地电磁测深法在甘肃寨上金矿区的找矿应用研究[J].黄金科学技术,2017,25(2):7-13.
ZhengZhenyun,XuanShenying,ZhengJie,et al.Application of controlled source audio magnetotelluric sounding method in prospecting of Zhaishang gold mine,Gansu Province[J].Gold Science and Technology,2017,25(2):7-13.
5 龚飞,底青云,王光杰,等.CSAMT方法对虎跳峡龙蟠右岸变形体的反应特征[J].工程地质学报,2005,13(4):542-545.
GongFei,DiQingyun,WangGuangjie,et al.CSAMT method for exploration of deformation bodies in Longpan area[J].Journal of Engineering Geology,2005,13(4):542-545.
6 李冰,晁代超,魏明君,等.电磁测深技术在深部铁矿探测中的应用研究——以河南舞阳铁矿区为例[J].中国地质,2013,40(5):1644-1654.
LiBing,ChaoDaichao,WeiMingjun,et al.The application of electromagnetic sounding method to deep iron ore exploration:A case study of the Wuyang iron mining area of Henan[J].Geology in China,2013,40(5):1644-1654.
7 王振军,李伟明,原波.山东三山岛—新立—仓上金矿床构造叠加晕特征浅析[J].黄金科学技术,2013,21(4):48-53.
WangZhenjun,LiWeiming,YuanBo.Features of structural superimposed halos in Sanshandao-Xinli-Cangshang gold deposits,Shandong Province[J].Gold Science and Technology,2013,21(4):48-53.
8 宋明春,张军进,张丕建,等.胶东三山岛北部海域超大型金矿床的发现及其构造—岩浆背景[J].地质学报,2015,89(2):365-383.
SongMingchun,ZhangJunjin,ZhangPijian,et al.Discovery and tectonic-magmatic background of superlarge gold deposit in offshore of northern Sanshandao,Shandong Peninsula,China[J].Acta Geologica Sinica,2015,89(2):365-383.
9 王友芳,孙世福,张荣敏,等.山东省莱州市仓上金矿北部含金破碎蚀变带物探普查成果报告[R].济南:山东省物化探勘查院,2003.
WangYoufang,SunShifu,ZhangRongmin,et al.Results of geophysical survey of gold bearing fragmentation alteration zone in northern Cangshang gold deposit,Laizhou,Shandong[R].Jinan:Shandong Institute of Geophysical and Geochemical Exploration,2003.
10 董坤,薄杨.V8工作站CSAMT勘探成果三维可视化研究[J].赤峰学院学报(自然科学版),2013,29(5):44-46.
DongKun,BoYang.Research on 3D visualization of CSAMT exploration results of V8 workstation[J].Journal of Chifeng University(Natural Science Edition),2013,29(5):44-46.
11 王若,王妙月,底青云,等.CSAMT三维单分量有限元正演[J].地球物理学进展,2014,29(2):839-845.
WangRuo,WangMiaoyue,DiQingyun,et al.3DIC CSAMT modeling using finite element method[J].Progress in Geophysics,2014,29(2):839-845.
12 段文旭,肖宏跃,刘垒,等.CSAMT方法在铁矿勘探中的应用[J].物探化探计算技术,2014,36(2):190-193.
DuanWenxu,XiaoHongyue,LiuLei,et al.Application of the CSAMT in iron mine exploration[J].Computing Techniques for Geophysical and Geochemical Exploration,2014,36(2):190-193.
13 底青云,王妙月,石昆法,等.高分辨V6系统在矿山顶板涌水隐患中的应用研究[J].地球物理学报,2002,45(5):744-748.
DiQingyun,WangMiaoyue,ShiKunfa,et al.An applied study on prevention of water bursting disaster in mines with the high resolution V6 system[J].Chinese Journal of Geophysics,2002,45(5):744-748.
14 夏训银,王身龙,王洪生,等.CSAMT方法在铁路隧道勘探中的应用[J].勘察科学技术,2006(4):61-64.
XiaXunyin,WangShenlong,WangHongsheng,et al.Application of CSAMT to exploration of railway tunnel[J].Site Investigation Science and Technology,2006(4):61-64.
15 董晴晴,冯欣欣.AMT方法在深部断裂构造识别中的应用——以南吕—欣木金矿区为例[J].山东国土资源,2016,32(10):48-51.
DongQingqing,FengXinxin.Application of AMT technology in identifying deep fault structures——setting Nanlü-Xinmu gold mine as an example[J]. Shandong Land and Resources,2016,32(10):48-51.
16 韦乖强,赵慧,赵秀玲,等.CSAMT在隐伏地质构造勘查中的三维可视化应用[J].山东国土资源,2015,31(4):56-58.
WeiGuaiqiang,ZhaoHui,ZhaoXiuling,et al.Application of three-dimensional visualization of CSAMT in exploring concealed geological structures[J].Shandong Land and Resources,2015,31(4):56-58.
17 于昌明.CSAMT方法在寻找隐伏金矿中的应用[J].地球物理学报,1998,41(1):133-138.
YuChangming.The application of CSAMT method in looking for hidden gold mine[J].Acta Geophysica Sinica,1998,41(1):133-138.
[1] SONG Yingxin,SONG Mingchun,DING Zhengjiang,WEI Xufeng,XU Shaohui,LI Jie,TAN Xianfeng,LI Shiyong,ZHANG Zhaolu,JIAO Xiumei,HU Hong,CAO Jia. Major Advances on Deep Prospecting in Jiaodong Gold Ore Cluster and Its Metallogenic Characteristics [J]. Gold Science and Technology, 2017, 25(3): 4-18.
[2] SONG Guozheng,YAN Chunming,CAO Jia,GUO Zhifeng,BAO Zhongyi,LIU Guodong,LI Shan,FAN Jiameng,LIU Caijie. Breakthrough and Significance of Exploration at Depth More than 1 000 m in Jiaojia Metallogenic Belt,Jiaodong:A Case of #br# Shaling Mining Area [J]. Gold Science and Technology, 2017, 25(3): 19-27.
[3] LIU Guodong,WEN Guijun,LIU Caijie,BAO Zhongyi,SUN Zhongquan,FAN Jiameng,LI Shan,YAN Chunming,GUO Zhifeng. Discovery,Characteristics and Prospecting Direction of Shuiwangzhuang Deep Super-large Gold Deposit in the Northern Section of Zhaoping Fault [J]. Gold Science and Technology, 2017, 25(3): 38-45.
[4] WAN Peng,DING Zhengjiang,HU Hong,WU Fengping,CHENG Rongrong,ZOU Jian. Deep Metallogenic Characteristics of Denggezhuang Gold Deposit in Jiaodong and Its Prospecting Method Combinations [J]. Gold Science and Technology, 2017, 25(3): 46-53.
[5] SONG Yingxin. Short Wave Infrared Spectral Characteristics of Alteration Minerals of Gold Deposit in the Northern Sea of Sanshandao and Its Implications for Deep Prospecting [J]. Gold Science and Technology, 2017, 25(3): 54-60.
[6] LI Hui,YU Bin,MA Jiuju,LI Deliang,SUN Fengzhou,LI Yongcai,RUAN Yixiao,WEI Jiang,ZHAO Jiaxiang,WANG Jun,WANG Yida,LI Shang,WEI Zixin. The Progressiveness of Structural Superimposed Halos for Method Prospecting Blind Ore body and Typical Examples of Ore Prospecting [J]. Gold Science and Technology, 2016, 24(6): 15-23.
[7] YU Chun,CHEN Yongling,LI Jianzhong,ZHAO Weixin,XIE Dan. Application of CSAMT to Deep Mine Prospecting in the Gaoloushan Gold Mine [J]. Gold Science and Technology, 2016, 24(1): 59-63.
[8] MU Yincai,LIU Cheng,TANG Gou,YAO Wei. Application of Controlled Source Audio-frequency Magnetotelluric (CSAMT) Measurement Method in Zhaishang Gold Mine [J]. Gold Science and Technology, 2015, 23(5): 6-13.
[9] LI Bing,SHANG Jiange,ZHANG Zhihui,LIU Qingquan,DING Yunhe,WEI Mingjun,LI Yongfeng. Application Research of Comprehensive Geophysical Prospecting Methods and Geological Characters for Porphyry Molybdenum Multiple Metal Deposits in the North Area of the Northern Dabie Mountains [J]. Gold Science and Technology, 2014, 22(3): 36-42.
[10] ZHENG Zhenyun,LIU Zhaojun,ZHENG Jie. Application of CSAMT Method in Prospecting of Southern Ore Belt of  Zhaishang Gold Fields,Gansu Province [J]. Gold Science and Technology, 2014, 22(2): 13-16.
[11] WANG Zhenjun,LI Weiming,YUAN Bo. Features of Structural Superimposed Halos in Sanshandao-Xinli-Cangshang Gold Deposits,Shandong Province [J]. Gold Science and Technology, 2013, 21(4): 48-53.
[12] LIU Jinyou,DING Xianhua,LIU Shuliang,LI Hongjie,DUN Meixia. Application of CSAMT Method in the Exploration of Xilaokou Gold Deposit [J]. Gold Science and Technology, 2013, 21(3): 16-20.
[13] LI Bing,DING Yunhe,WEI Mingjun,LI Yongfeng,LUO Zhengzhuan,SHANG Jiange. Explore Deep Concealed Orebody by the Application of Synthetic Methods of Geophysical Exploration:Take Polymetallic Metallogenic Belt in West of Henan Province as an Example [J]. Gold Science and Technology, 2012, 20(6): 21-26.
[14] WANG Enjing,GUO Guangjun,ZHAO Rongxin,WANG Yanwei,YU Xiaojie,LV Guangyao,WANG W. Research and Application of the Mineralization Network Structure in Sizhuang Gold Deposit,Shandong Province [J]. J4, 2012, 20(4): 76-80.
[15] WANG Yingtian,WANG Shanzhang,LI Bo,HAN Yu. The Metallogenic Regularity and Deep Prospecting of No.1 Vein in Dazhuangzi Gold Deposit,Shandong Province [J]. J4, 2012, 20(4): 123-127.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!