img

Wechat

Adv. Search

Gold Science and Technology ›› 2018, Vol. 26 ›› Issue (1): 56-63.doi: 10.11872/j.issn.1005-2518.2018.01.056

Previous Articles     Next Articles

Study On Rate Effect of Uniaxial Compression Test for Red Sandstone

WANG Jin1,GONG Fengqiang 1,2   

  1. 1.School of Resources and Safety Engineering,Central South University,Changsha    410083,Hunan,China;2.Center for Advanced Study,Central South University,Changsha    410083,Hunan,China
  • Received:2017-01-05 Revised:2017-03-01 Online:2018-02-28 Published:2018-05-19

Abstract:

The uniaxial compression tests of homogeneous red sandstone under low loading (strain) rate range with different order of magnitude were carried out using hydraulic servo test machine.The effects of loading (strain) rate on the compressive strength,tangent elastic modulus and failure strain were investigated.The displacement  control  loading  was  adopted in the process of  testing,and  the  loading  rate were 0.12,1.2,12,120 mm/min respectively.The results show that there are good linear relationship among displacement control loading rate,actual loading rate and strain rate of specimen.The uniaxial compressive strength and tangent elastic modulus of rock materials increase with the loading rate under different loading rates,the uniaxial compressive strength increases by 11%,the tangent elastic modulus increases by 13%,and the rate effect is remarkable. It is also found that the failure strain is no associated with strain rate (loading rate) by experimental data,and there is no law of rate effect,so the strength criterion should be stress criterion instead of strain criterion.

 

Key words: red sandstone, uniaxial compression test, rate effect, loading rate, strain rate, compressive strength, tangent elastic modulus, stress criterion

CLC Number: 

  • TU458

[ 1 ] Zhao J,Li H B,Wu M B,et al. Dynamic uniaxial compression tests on granite[J].International Journal of Rock Mechanics and Mining Sciences,1999,36(2):273-277.
[ 2 ] Li H B,Zhao J,Li T J. Triaxial compression tests of a granite at different strain rates and confining pressures[J].International Journal of Rock Mechanics and Mining Sciences,1999,36(8):1057-1063.
[ 3 ] 梁昌玉,李晓,李守定,等. 岩石静态和准动态加载应变率的界限值研究[J]. 岩石力学与工程学报,2012,31(6):1156-1161.Liang Changyu,Li Xiao,Li Shouding,et al. Study on the boundary value of static and quasi dynamic loading strain rate of rock[J].Chinese Journal of Rock Mechanics and Engineering,2012,31(6):1156-1161.
[ 4 ] 黄达,黄润秋,张永兴. 粗晶大理岩单轴压缩力学特性的静态加载速率效应及能量机制试验研究[J]. 岩石力学与工程学报,2012,31(2):245-255.Huang Da,Huang Runqiu,Zhang Yongxing.Experimental investigations on static loading rate effects on mechanical properties and energy mechanism of coarse crystal grain marble under uniaxial compression[J].Chinese Journal of Rock Mechanics and Engineering,2012,31(2):245-255.
[ 5 ] 梁卫国,徐素国,莫江,等. 盐岩力学特性应变率效应的试验研究[J].岩石力学与工程学报,2010,2(1):43-50.Liang Weiguo,Xu Suguo,Mo Jiang,et al. Test study of strain rate effects on mechanical performances of salt rock[J].Chinese Journal of Rock Mechanics and Engineering,2010,29(1):43-50.
[ 6 ] 杨仕教,曾晟,王和龙. 加载速率对石灰岩力学效应的试验研究[J].岩土工程学报,2005,27(7):786-788.Yang Shijiao,Zeng Sheng,Wang Helong. Experimental analysis on mechanical effects of loading rates on limestone[J].Chinese Journal of Geotechnical Engineering,2005,27(7):786-788.
[ 7 ] 朱瑞赓,吴绵拔. 在不同加载速率条件下花岗岩的破坏准则[J].岩土力学,1984,5(1):37-46.Zhu Ruigeng,Wu Mianba. Failure criterion of granite at different loading rates[J].Rock and Soil Mechanics,1984,5(1):37-46.
[ 8 ] 李刚,陈正汉,谢云,等. 高应变率条件下三峡工程花岗岩动力特性的试验研究[J].岩土力学,2007,28(9):1833-1840.Li Gang,Chen Zhenghan,Xie Yun,et al. Test research on dynamic characteristics of three Gorges granite under high strain rate[J].Rock and Soil Mechanics,2007,28(9):1833-1840.
[ 9 ] 冯遗兴,邱一平,李彰明. 应变率对岩石强度和变形性质的影响[J].岩土工程学报,1986,8(6):50-56.Feng Yixing,Qiu Yiping,Li Zhangming. The effect of strain rate on strength and deformability of rock[J].Chinese Journal of Geotechnical Engineering,1986,8(6):50-56.
[ 10 ] Lu Y B,Li Q M. A correction methodology to determine the strain-rate effect on the compressive strength of brittle material based on SHPB testing[J].International Journal of Protective Structures,2011,2(1):127-138.
[ 11 ] Asprone D,Cadoni E,Prota A,et al. Dynamic behavior of a Mediterranean natural stone under tensile loading[J].International Journal of Rock Mechanics & Mining Sciences,2009,46(3):514-520.
[ 12 ] 张宗贤,俞洁,赵清. 岩石的加载率效应[J].有色金属,1996,48(1):1-4.Zhang Zongxian,Yu Jie,Zhao Qing. Effects of loading rates on rock materials[J].Nonferrous M etal s,1996,48(1):1-4.
[ 13 ] 戚承志,钱七虎. 岩石等脆性材料动力强度依赖应变率的物理机制[J].岩石力学与工程学报,2003,22(2):177-181.Qi Chengzhi,Qian Qihu. Physical mechanism of dependence of material strength on strain rate for rock-like material[J].Chinese Journal of Rock Mechanics and Enginee-ring,2003,22(2):177-181.
[ 14 ] 马怀发,陈厚群,黎保琨. 应变率效应对混凝土动弯拉强度的影响[J].水利学报,2005,36(1):69-76.Ma Huaifa,Chen Houqun,Li Baokun. Influence of strain rate effect on dynamic bending strength of concrete[J].Journal of Hydraulic Engineering,2005,36(1):69-76.
[ 15 ] 宫凤强,司雪峰,李夕兵,等. 基于应变率效应的岩石动态Mohr-Coulomb准则和Hoek-Brown准则研究[J].中国有色金属学报,2016,26(8):1763-1773.Gong Fengqiang,Si Xuefeng,Li Xibing,et al. Rock dynamic Mohr-Coulomb and Hoek-Brown criteria based on strain rate effect[J].The Chinese Journal of Nonferrous Metals,2016,26(8):1763-1773.
[ 16 ] Sang H C,Ogata Y,Kaneko K. Strain-rate dependency of the dynamic tensile strength of rock[J].International Journal of Rock Mechanics and Mining Sciences,2003,40(5):763-777.
[ 17 ] Mahmuto?lu Y. The effects of strain rate and saturation on amicro-cracked marble[J].Engineering Geology,2006,82(3):137-144.

[1] Zhu SU,Deming ZHANG,Qinli ZHANG. Study on Cementation Filling Test and Environmental Effect of Gold Mine Tailings [J]. Gold Science and Technology, 2019, 27(6): 912-919.
[2] Wenfeng XIAO,Jianhong CHEN,Yi CHEN,Ximei WANG. Optimization of Multi-objective Filling Slurry Ratio Based on Neural Network and Genetic Algorithm [J]. Gold Science and Technology, 2019, 27(4): 581-588.
[3] Jianping ZHAO,Minghu WANG,Yihan ZHAO. Influence of Moisture Content on Dynamic Tensile Strength of Sandstone [J]. Gold Science and Technology, 2019, 27(2): 216-222.
[4] LIN Ge, GONG Fengqiang. Research on Evaluation Index of Red Sandstone Instability Under Different Stress [J]. Gold Science and Technology, 2018, 26(2): 195-202.
[5] CHENG Hao, XU Tao, ZHOU Guanglei, FANG Ke. Numerical Simulation of Fracture and Acoustic Emission Evolution of Hetero-geneous Rocks [J]. Gold Science and Technology, 2018, 26(2): 170-178.
[6] LAN Zhipeng,WANG Xinmin,WANG Hongjiang,CHEN Qiusong. Experiment Research on Slurry Setting Time’s Effect on High-sulphur Backfill’s Compressive Strength [J]. Gold Science and Technology, 2016, 24(5): 13-18.
[7] XIE Min-Xiong, WANG Bao-Qing, LIU Mo-Zhi. Analysis and Option of Energy Saving in Xinli Concentrator,Sanshamlao Gold Mine [J]. J4, 2009, 17(6): 66-69.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] ZHAO Bingxin, SONG Bingjian, ZHOU Dianyu, HUAI Baofeng. Geological Features and Ore-Forming Rule of the Shabaoshi Gold Deposit in Mohe,Heilongjian[J]. J4, 2007, 15(2): 20 -25 .
[2] ZHAO Guang-Xi, WANG Long-Cheng. Analysis of Gold M etallogenetic Sysemin in Southen Band of Northen Moutain[J]. J4, 2007, 15(3): 28 -33 .
[3] LI Deting,XU Jiuhua,SHAN Lihua,XU Daoxue. STUDY ON THE MINERALIZATION FEATURE AND TECHNOLOGICAL CHARACTERISTIC OF ORE MINERAL IN DEEP OF JIAOJIA GOLD MINE[J]. J4, 2001, 9(5): 9 -22 .
[4] XU Qing-Jun, XU Qing-Yuan, LU Ren-Jiang, SUN Jian, HUANG Shan, LIU Ji-Xin. Research on the Technology of Mining Complex Orebody Combined Shallow Hole Shrinkage and Deep Hole Blasting Method[J]. J4, 2011, 19(1): 49 -50 .
[5] XU Zhongmin, ZHUANG Yukai, LUAN Zuochun. The Way of Part positive Crossing Matrix Separate out Factor Apply in Optimiz -ing Floatation Factor Test[J]. J4, 2008, 16(1): 7 -11 .
[6] YAN Wenqiang,YANG Fengxi. Discussion on Wudaoling Molybdenum Deposit"s Geological Mineralization Roles by Yicuomao Rock[J]. J4, 2008, 16(3): 37 -39 .
[7] ZHAO Youjun,LI Yanqiang,LU Yaozu. Metallogenic Condition and Prospecting Potential of M anzhanggang Gold Deposit in Xinghai County,Qinghai Provinc[J]. J4, 2008, 16(5): 27 -28 .
[8] MA Bin, LEI Bin, TAN Xuejun. The Application And Evaluation Of The TypeWGL- 1 Medium Depth Bore Obliquity Survey Meter[J]. J4, 2005, 13(1-2): 30 -33 .
[9] ZHANG Ai, WANG Li, WANG Xiao-Jing. Discussing on Problems about Designing and Construction Technology of Static Shrinkage Method[J]. J4, 2009, 17(1): 49 -52 .
[10] LU Yaozu. Geological Characteristics and Prospecting Potential of the Antimony Gold Occurence in Longte[J]. J4, 2008, 16(3): 13 -16 .