img

QQ群聊

img

官方微信

高级检索

J4 ›› 2006, Vol. 14 ›› Issue (1): 32-35.

• 新技术·新方法 • 上一篇    下一篇

新型尾砂胶结材料在应用中的几个问题

陈华珍, 孙涛   

  1. 桂林工学院资源与环境工程系, 广西  桂林   541004
  • 收稿日期:2005-11-11 修回日期:2005-02-03 出版日期:2006-02-25 发布日期:2011-11-22
  • 作者简介:陈华珍(1981-), 女, 资源与环境工程系分析专业研究生

Some Prorblems of the New Tailing Cemnent Material in the Application

CHEN Huazhen, SUN Tao   

  1. Department of Resource and EnvironmentE ngineering,Guilin University of Technology , Guilin   541004,Guangxi,China
  • Received:2005-11-11 Revised:2005-02-03 Online:2006-02-25 Published:2011-11-22

摘要:

对焦家新型尾砂胶结材料在矿山充填中所存在的几个问题进行了探讨, 指出了新型尾砂胶结材料在充填中与传统胶结剂的不同特点,提出了解决建议。

关键词: 焦家, 尾砂充填, 胶结材料, 金矿

Abstract:

This paper focused and discussed som e prob lem s of the Jiao jia s' new tailing cem ented material that exists in the mineral filling and pointed out the different characteristics in filling between the new tailing cemented material and the traditional cemented material, and give some suggests to solve.

Key words: Jiaojia, Tailing filling, Cemented material, Gold mine

中图分类号: 

  • TD853.34


[1] 河西金矿. 新型尾砂胶结材料及其在矿山充填中的应用(项目鉴定材料) . 2005.

[2] 焦家金矿. 焦家新型尾砂胶结材料推广会材料. 2003.

[3] 山东省地质六队. 山东省招远县河西区段地质勘查报告. 1987.

[1] 董金奎,申延,邱俊刚. 焦家金矿寺庄矿区岩体节理裂隙调查与矿岩稳定性分析[J]. J4, 2012, 20(2): 58-61.
[2] 曹英莉, 秦秀合, 张瑞忠, 高金成. 夏甸金矿水平分层进路式尾砂充填采矿法的研究与应用[J]. J4, 2012, 20(2): 62-66.
[3] 王大为,王卓,李磊,李伟宁,秦伟利,刘洪伟,李伟国. 上向水平扇形进路采矿方法的研究及应用[J]. J4, 2012, 20(2): 67-70.
[4] 刘福江,王元魁,王振军,魏开林,武志明. 提高多节理裂隙矿岩爆破质量的探讨[J]. J4, 2012, 20(2): 71-73.
[5] 白复锌,张永林,张彬. 鑫汇金矿的非胶结充填连续采矿技术[J]. J4, 2008, 16(4): 66-69.
[6] 陈宏兵, 王永成, 胡世利. 高水固结尾砂充填工艺的充填材料及用量计算[J]. J4, 2007, 15(3): 58-61.
[7] 牟振山, 刘学胜, 李和平, 薛田喜. 注浆胶结矿柱充填工艺在河西金矿的研究[J]. J4, 2006, 14(3): 22-25.
[8] 曹国荣. 合理利用矿山井下充填加强地表开采保护[J]. J4, 2005, 13(6): 27-29.
[9] 李兴尚,郭忠林. 废石充填采矿法在新桥矿的实践[J]. J4, 2004, 12(2): 41-45.
[10] 刘学胜, 薛田喜, 王秀娟. 模板隔离槽充填工艺的研究[J]. J4, 2004, 12(1): 5-7.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!