img

QQ群聊

img

官方微信

高级检索

黄金科学技术 ›› 2014, Vol. 22 ›› Issue (1): 56-59.doi: 10.3969/j.issn.1005-2518.2014.01.056

• 采选技术与矿山管理 • 上一篇    下一篇

缓倾斜极薄矿体采矿方法优化方案

丁明飞,王卓,王大为,王思红,刘玉勇,秦伟利   

  1. 山东黄金矿业(莱州)有限公司焦家金矿,山东  莱州   261441
  • 收稿日期:2013-07-18 修回日期:2013-10-23 出版日期:2014-02-28 发布日期:2014-06-25
  • 作者简介:丁明飞(1988-),男,山东莱西人,助理工程师,从事金矿开采工作.flying2009.happy@163.com

The Optimization of Mining Method Scheme for Gentle Dip and Filminess Ore Body

DING Mingfei,WANG Zhuo,WANG Dawei,WANG Sihong,LIU Yuyong,QIN Weili   

  1. Jiaojia Gold Mine,Shandong Gold mining(Laizhou)Co.,Ltd.,Laizhou   261441,Shandong,China
  • Received:2013-07-18 Revised:2013-10-23 Online:2014-02-28 Published:2014-06-25

摘要:

提高缓倾斜极薄矿体的回采效率一直是有待采矿界解决的重大难题。按照常规削壁充填法进行矿体回采的效率低,损失贫化率大,尤其是溜矿系统的布置更是缓倾斜极薄矿体无法有效解决的问题。针对上述问题,对削壁充填采矿法进行了优化。利用溜槽代替溜井下放矿石,溜槽两侧采用毛石砌墙,使人员能够进入溜井处理堵塞现象,从而提高了回采效率。在崩落毛石基础上,利用胶结尾砂进行充填作业,打上一层胶结面,不仅降低了贫化损失率,而且大大提高了矿石回采效率。这些优化措施在焦家金矿望儿山分矿进行推广应用,给矿山带来了良好的经济效益。

关键词: 削壁充填, 缓倾斜薄矿体, 溜槽

Abstract:

It is remain an enormous and difficult problem to improve the efficiency of stoping the gentle dip and filminess ore body.If the resuming fill is applied to stope ore body according to the conventional rules,it will lead to lower efficiency and higher loss impoverishment rate,especially,the slip of mine system arrangement can not effectively solve the problem for gentle dip and filminess ore body.Aiming at the problem above,thus the resuming-fill mining method is optimized.Using the chute instead of sneaking underground ore,both sides of the chute with rubble wall,all of which can make the staff enter the chute to solve the blocking phenomenon,additionally,it improves the mining efficiency.Making use of cemented backfilling materials filling in caving on the basis of rubble,and playing a layer with enough strength of cementation plane can not only reduce the dilution loss rate,but also greatly improve the efficiency of ore mining.These optimization measures have been widely applied in Wangershan sub-ore of Jiaojia gold mine,which has brought good economic benefit for the mine.

Key words: resuming fill, gentle dip and filminess ore body, chute

中图分类号: 

  • TD853.21

[1] 薜田喜.山东焦家金矿生产技术开发研究进展[J].黄金科学技术,2010,18(2):67-69. 
[2] 杨官涛,袁梅芳.缓倾斜薄矿脉机械化开采新技术及工程实践[J].矿业研究与开发,2013,33(3):1-3,25. 
[3] 郭旺.缓倾斜薄矿体采矿方法创新设计与采动损伤过程模拟[D].长沙:中南大学,2012.
[4] 品垒.缓薄矿体盘区组合机械化开采方法优化研究[D].武汉:武汉科技大学,2010.  
[5] 王彦玮,张忠辉,邱俊刚,等.山东望儿山金矿地表沉陷数值模拟研究[J].黄金科学技术,2011,19(3):72-76. 
[6] 冷寒松,邓尧增,胥华龙,等.有底柱分段崩落采矿法在焦家金矿的研究与应用[J].黄金科学技术,2010,18(4):66-57.
[7] 贾洪杰,常海龙.削壁充填采矿法在金厂沟金矿的应用实践[J].黄金,2001,22(1):33-35.
[8] 陈其府.福建安村金矿削壁充填采矿方法探讨[J].采矿技术,2008,8(6):7-8.
[9] 祁保明.急倾斜极薄矿体削壁留矿法[J].有色金属,1997,(4):16-18.
[10] 王来军,薛田喜,陈涛,等.缓倾斜薄矿体采矿方法的研究[J].黄金科学技术,2003,11(3):44-47.
[11] 张运良.极薄矿脉采矿方法实验总结[J].江西有色金属,1992,6(3):170-174.
[12] 于金吾.现代矿山采矿新工艺、新技术、新设备与强制性标准规范全书[M].北京:当代中国音像出版社,2005.
[13] 赖伟,肖木恩,李文明.削壁充填法在开采极薄矿脉中的应用[J].采矿技术,2011,11(3):9-11.
[14] 解世俊.金属矿床地下开采[M].北京:冶金工业出版社,1979.

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!