[an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]Vibration Effect Analysis of Downhole Pre-splitting Blasting Based on VMD-HHT
Received date: 2024-01-22
Revised date: 2024-04-10
Online published: 2024-07-05
The current mining method employed at Dahongshan copper mine in Yuxi,Yunnan Province utilizes the large blasting technology of sublevel open-stope subsequent filling method.However,due to the excessive amount of explosive used in each blast,significant damage is inflicted upon the retained rock mass which ultimately affects stope stability.In order to address this issue,a more holes and less charge approach has been implemented whereby dense blast holes are arranged at a certain distance from the retained rock mass and single hole charges have been reduced.Prior to detonating the main detonation zone,these rows of holes are first detonated thereby creating a gap with a specific width that serves to minimize damage inflicted upon the retained rock mass.The variational mode decomposition and Hilbert-Huang transform(VMD-HHT) method was employed in this study to analyze the field-measured blasting vibration signals.The results show that the instantaneous energy distribution of the pre-splitting vibration signals primarily concentrates within the time range of 0 to 0.5 seconds,while the frequency distribution predominantly lies within the range of 40 Hz.The combined velocity of the three measuring points is used to calculate the vibration reduction rate,and the vibration reduction rates of the three measuring points are 21.0%,30.1% and 38.5%,respectively,which effectively reduces the damage and destruction of blasting vibration to the retained rock mass.
Xianglong LI , Lin YU , Yuanming HUANG , Hao CHEN , Yanwei ZHAO . Vibration Effect Analysis of Downhole Pre-splitting Blasting Based on VMD-HHT[J]. Gold Science and Technology, 2024 , 32(3) : 501 -510 . DOI: 10.11872/j.issn.1005-2518.2024.03.032
http://www.goldsci.ac.cn/article/2024/1005-2518/1005-2518-2024-32-3-501.shtml
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
State Administration of Work Safety,2014. Safety specifications of blasting:GB 6722-2014 [S].Beijing:Standards Press of China.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
陈吉辉,仇文革,赵旭伟,等,2022.基于小波包技术地铁隧道分区爆破振动特性研究[J].振动与冲击,41(6):222-228,255.
|
|
褚夫蛟,王作鹏,李铭涵,等,2023.基于HHT频谱分析逐孔起爆微差时间试验研究[J].爆破,40(4):103-109.
|
|
费鸿禄,山杰,2022.CEEMDAN-小波阈值法在爆破振动信号处理中的应用[J].爆破,39(3):41-47,164.
|
|
国家安全生产监督管理总局,2014. 爆破安全规程:GB 6722-2014 [S].北京:中国标准出版社.
|
|
|
|
李启月,王宏伟,王靖博,等,2021.基于EEMD和小波阈值法的爆破振动信号预处理研究[J].矿冶工程,41(3):28-31,36.
|
|
李祥龙,杨长辉,王建国,等,2022.基于数值模拟和频谱分析的孔间精确延时探究[J].有色金属工程,12(2):99-105.
|
|
李祥龙,赵泽虎,王建国,等,2021.基于EMD-HHT和小波理论的地下浅孔爆破振动规律研究[J].有色金属工程,11(12):100-108.
|
|
凌同华,刘浩然,张亮,等,2018.双正交小波基构造法及其在爆破振动信号分析中的应用[J].振动与冲击,37(11):273-280.
|
|
鲁超,吴贤振,刘建伟,等,2021.基于小波与EMD的井下深孔爆破振动信号对比分析[J].中国矿业,30(2):84-90.
|
|
马瑞恒,时党勇,2005.爆破振动信号的时频分析[J].振动与冲击,(4):92-95,142.
|
|
孟彪,殷浩杰,陈辉,等,2022.岩巷掘进中电子雷管爆破振动信号的时频能量分析[J].金属矿山,51(9):55-62.
|
|
彭亚雄,刘广进,苏莹,等,2021.基于变分模态分解算法的隧道爆破振动信号光滑降噪模型[J].振动与冲击,40(24):173-179.
|
|
饶宇,夏元友,胡英国,等,2017.预裂缝对爆破振动频谱分布特征的影响[J].振动与冲击,36(7):191-198.
|
|
任艳民,龙运杰,唐虹靖,等,2023.基于EEMD-Hilbert变换的爆破振动信号频带—能量分布特征研究[J].矿冶工程,43(2):35-39.
|
|
孙冰,宋良灵,曾晟,等,2023.基于FSWT-FDM的露天矿爆破振动信号分解方法[J].金属矿山,1-12.[2024-06-06].
|
|
王海龙,柏皓博,赵岩,等,2021.基于傅里叶分解—小波包分析的爆破信号去噪方法[J].爆破,38(2):37-44.
|
|
徐振洋,莫宏毅,包松,等,2023.基于VMD-Teager的露天边坡爆破振动信号能量特征研究[J].振动与冲击,42(7):77-88,105.
|
|
晏俊伟,龙源,方向,等,2007.基于小波变换的爆破振动信号能量分布特征分析[J].爆炸与冲击,27(5):405-410.
|
|
张声辉,高文学,刘江超,等,2022.基于EMD分解的爆破振动信号主成分提取与分析[J].工程爆破,28(6):8-14.
|
|
张帅,薛江龙,杨健康,等,2023.基于HHT分析的大断面软岩隧道爆破振动控制效果研究[J].工程爆破,29(6):158-166.
|
|
赵岩,王小敬,王海龙,等,2022.交叉隧道爆破振速回归分析及对比研究[J].工程爆破,28(5):121-127.
|
/
| 〈 |
|
〉 |