[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Gold Science and Technology >

2021 , Vol. 29 >Issue 4: 612 - 619

DOI: https://doi.org/10.11872/j.issn.1005-2518.2021.04.006

Mining Technology and Mine Management

Research on Automatic Extraction Method of Top and Bottom Line of Open-Pit Slope Based on DEM

  • Tiandong SHI ,
  • Lin BI
Expand
  • School of Resources and Safety Engineering，Center South University，Changsha 410083，Hunan，China

Received date: 2020-12-26

  Revised date: 2021-03-08

  Online published: 2021-10-08

Fold

Highlights

The slope top and bottom line plays an important role in open-pit mine mining design， production planning，calculation of stripping volume，road network planning，etc.Traditional extraction methods require the use of total stations and other equipment to rely on manual extraction，which is inefficient.In order to solve the problem of low efficiency of the traditional method of manually extracting the slope top and bottom line from the open-pit mine 3D model，a method of automatically extracting the slope top and bottom line from the open-pit mine DEM （Digital Elevation Model） 3D model was studied.The first step of the method is to pre-process the elevation data with up-sampling and bilateral filtering.The second step is to set a threshold，then according to the different elevation values of different regions in the DEM 3D model，different regions are converted into grayscale images with different pixel values.The last step is to perform gradient operation on the gray image，extract the edge pixels in the image，combine with an improved Zhang-Suen algorithm to extract the skeleton of the edge lines，and design a search algorithm based on eight neighborhoods to order the edge pixels and connect them into a complete contour line，and use the Douglas-Peucker algorithm for thinning to get the final step line.The experiment used the measured three-dimensional model data of an open-pit mine for testing.With the aid of a three-dimensional visualization software platform，the extracted step line is superimposed with the three-dimensional model of the pit，visually analyzed and compared，and the accuracy of the extracted results is judged.The visualization results show that compared with the traditional manual extraction method，the automation method greatly improves the work efficiency under the condition of ensuring the extraction accuracy，and most importantly realizes the automation of the extraction process.This method is also applicable to the terrain features of the DEM 3D model line extraction.

Cite this article

Tiandong SHI , Lin BI . Research on Automatic Extraction Method of Top and Bottom Line of Open-Pit Slope Based on DEM[J]. Gold Science and Technology, 2021 , 29(4) : 612 -619 . DOI: 10.11872/j.issn.1005-2518.2021.04.006

[an error occurred while processing this directive]

http://www.goldsci.ac.cn/article/2021/1005-2518/1005-2518-2021-29-4-612.shtml

References

Publishing order | Descend order by publishing year | Descend order by cited within
Chen Huawei， Yuan Xiaocui， Wu Lushen， al et，2019.Automatic point cloud feature-line extraction algorithm based on curvature-mutation analysis［J］.Optics and Precision Engineering，27（5）：1218-1228.

Chen W， Sui L C， Xu Z C， al et，2012.Improved Zhang-Suen thinning algorithm in binary line drawing applications［C］//International Conference on Systems and Informatics（ICSAI2012）.Yantai：IEEE：1947-1950.

Cheng X L， Cheng X J， Li Q， al et，2018.Automatic registration of terrestrial and airborne point clouds using building outline features［J］.IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing，11（2）：628-638.

Fuentes I O H， Bravo-Zanoguera M E， Yanez G G，2009.FPGA implementation of the bilinear interpolation algorithm for image demosaicking［C］//International Conference on Ele-ctrical，Communications，and Computers.Cholula，Puebla：IEEE：25-28.

Kang X， Li J， Fan X，2018.Line feature extraction from RGB laser point cloud［C］//International Congress on Image and Signal Processing，BioMedical Engineering and Informatics （CISP-BMEI）.Beijing：IEEE：1-5.

Kang Z Z， Zhong R F， Wu A， al et，2016.An Efficient planar feature fitting method using point cloud simplification and threshold-independent baysac［J］.IEEE Geoscience and Remote Sensing Letters，13（12）：1842-1846.

Kim H， Liu B， Myung H，2017.Road-feature extraction using point cloud and 3D LiDAR sensor for vehicle localization［C］//International Conference on Ubiquitous Robots and Ambient Intelligence （URAI）.Jeju：IEEE：891-892.

Li Guangjin， Yang Tao，2019.A guided point cloud filtering algorithm combined with Gaussian statistics［J］.Manufacturing Automation，41（4）：80-84.

Liu Lijun， Liu Jiping， Zhou Yuanying， al et，2003.A study of automatic vecror system about topographic map based on mathematical morphology［J］.Application Research of Co-mputers，（2）：83-85.

Ma Xianming， Li Yongshu， Xie Jiali，2017.Experiment and analysis of point cloud denoising using bilateral filtering method［J］.Bulletin of Surveying and Mapping，（2）：87-89.

Sun Chao， Tan Zhenghua，2019.Optimal selection of the final boundary of open-pit mine under multi-factor conditions［J］.Nonferrous Metals Engineering，9（5）：72-80.

Wang Qing， Gu Xiaowei， Xu Xiaochuan， al et，2014.Holistic optimization of production planning elements and its application for open-pit mine［J］.Journal of Northeastern University（Nature Science），35（12）：1796-1800.

Wang S M， Chen Y M， Liu Y F， al et，2015.The extraction of feature points from DEM geographic data in cloud computing environment［C］//International Conference on Geoinforma-tics.Wuhan：IEEE：1-5.

Wu Qunyong， Wu Zufei， Zhang Liangpan，2019.GPS trajectory agglomeration and refined road network extraction［J］.Acta Geodaetica et Cartographica Sinica，48（4）：502-511.

Yu J， Chen G， Zhang X， al et，2013.An improved Douglas-Peucker algorithm aimed at simplifying natural shoreline into direction-line［C］//21st International Conference on Geoinformatics.Kaifeng：IEEE：1-5.

Yuan Ruidong， Yang Xinfeng， Wang Lei， al et，2018.Application of automatic generation method of open-pit characteristic line based on point cloud data［J］.Modern Mining，34（10）：168-170.

Zhang Y Y， Jing X J， Wang X Y，2009.An approach to improve the ZS thinning algorithm［C］// International Conference on Network Infrastructure and Digital Content.Beijing：IEEE：750-753.

Zhong Baojiang， Lu Zhifang， Ji Jiahuan，2016.Review on image interpolation techniques［J］.Journal of Data Acquisition and Processing，31（6）：1083-1096.

Zhu Haibin， Wang Yan， Li Yamei，2018.Surveying and mapping of open-pit mining area using unmanned aerial vehicle［J］.Coal Engineering，50（10）：162-166.

Zhu Qing， Zhao Jie， Zhong Zheng， al et，2004.The extraction of topographic patterns based on regular grid DEMs［J］.Acta Geodaetica et Cartographica Sinica，（1）：77-82.

陈华伟，袁小翠，吴禄慎，等，2019.基于曲率突变分析的点云特征线自动提取［J］.光学精密工程，27（5）：1218-1228.

李广金，杨涛，2019.一种结合高斯统计的点云引导滤波算法［J］.制造业自动化，41（4）：80-84.

刘利军，刘吉平，周远英，等，2003.基于数学形态学的地形图自动矢量化研究［J］.计算机应用研究，（2）：83-85.

马先明，李永树，谢嘉丽，2017.利用双边滤波法进行点云去噪的试验与分析［J］.测绘通报，（2）：87-89.

孙超，谭正华，2019.多因素条件下的露天矿最终境界优选［J］.有色金属工程，9（5）：72-80.

王青，顾晓薇，胥孝川，等，2014.露天矿生产规划要素整体优化方法及其应用［J］.东北大学学报（自然科学版），35（12）：1796-1800.

邬群勇，吴祖飞，张良盼，2019.出租车GPS轨迹集聚和精细化路网提取［J］.测绘学报，48（4）：502-511.

袁睿栋，杨新锋，王磊，等，2018.基于点云数据的露天矿坑特征线自动生成方法的应用［J］.现代矿业，34（10）：168-170.

钟宝江，陆志芳，季家欢，2016.图像插值技术综述［J］.数据采集与处理，31（6）：1083-1096.

朱海斌，王妍，李亚梅，2018.基于无人机的露天矿区测绘研究［J］.煤炭工程，50（10）：162-166.

朱庆，赵杰，钟正，等，2004.基于规则格网DEM的地形特征提取算法［J］.测绘学报，（1）：77-82.

Options
Outlines

/

〈 〉

[an error occurred while processing this directive]