Three-dimensional Planning Design and Construction of Multi-size Stone High-strength Mining Development System
Received date: 2019-06-21
Revised date: 2019-07-15
Online published: 2019-11-07
In order to ensure the balance of stone supply and efficient safety production of multi-size stone high-strength mining mines，the three-dimensional digital mining software was used to carry out the planning，design and construction supervision of the mining development system.Based on the large-scale high-strength mining project of Yushan Island，Zhoushan Green Petrochemical Base，3Dmine software was used to establish a three-dimensional digital surface model of the mining area.The optimization design of the transportation road and the calculation of the amount of engineering were carried out，finally animation simulation was used.The car-road synergy effect of the open-pit mining development system was analyzed to ensure that the construction strength requirements were met.Practice has shown that the generated development system has good visibility，which contributed to rational layout of the stope and the scientific allocation of stone materials，laying a technical foundation for the high-strength mining of multi-size stones.It is convenient to build a digital model of the mine and to a large extent realize the virtualization operation.Three-dimensional mining software is applied in the whole life cycle of open-pit mines to carry out mining design，road construction design，blasting design，engineering quantity settlement，production plan formulation and other work，which reduces the labor intensity of personnel，improves the work efficiency，and improves the level of construction refinement.Three-dimensional mining software can solve the problems of traditional open pit mining design software （such as CAD software，et al.） such as complicated operation，poor visibility and difficulty in effectively communicating the construction intention，and improve the practical production guiding significance of design.Using 3Dmine digital mining software to design a three-dimensional development system for high-strength mining of multi-specification stones and apply it to site construction is helpful to ensure the balance of supply and demand of multi-specification stones and the sustainable and efficient production management of mines.
Yucheng TANG , Xiang FANG , Zhonglei ZHANG , Xiaorong CUI . Three-dimensional Planning Design and Construction of Multi-size Stone High-strength Mining Development System[J]. Gold Science and Technology, 2019 , 27(5) : 755 -761 . DOI: 10.11872/j.issn.1005-2518.2019.05.755
| 1 | 王立梅.三维可视化建模技术在矿山设计中的应用[J].煤矿安全，2018，49（11）：121-124. |
| 1 | WangLimei.Application of 3D visualization modeling technology in mine design[J].Safety in Coal Mines，2018，49（11）：121-124. |
| 2 | 李佳梦，张元生，王辉，等.三维采矿设计软件在智能矿山的实践应用[J].中国矿业，2018，27（增2）：254-257，262. |
| 2 | LiJiameng，ZhangYuansheng，WangHui，et al.Application of 3D mining design software in intelligent mine[J].China Mining Magazine，2018，27（Supp.2）：254-257，262. |
| 3 | 钟德云，胡柳青，吴国栋.基于3DMine软件的露天矿开采设计[J].现代矿业，2012，27（10）：11-14. |
| 3 | ZhongDeyun，HuLiuqing，WuGuodong.Open-pit mine exploitation based on 3DMine software[J].Modern Mining，2012，27（10）：11-14. |
| 4 | 王立磊，王李管.依托DIMINE软件实现中国矿山的数字化[J].现代矿业，2009，25（3）：23-27. |
| 4 | WangLilei，WangLiguan.Using DIMINE software to achieve digitization of China mine[J].Modern Mining，2009，25（3）：23-27. |
| 5 | 徐立明，牛新生.地质体三维可视化模拟的现状与展望[J].西南民族大学学报（自然科学版），2006，32（1）：151-154. |
| 5 | XuLiming，NiuXinsheng.Current status and prospects of the 3-dimensional visual simulation of geological bodies[J].Journal of Southwest University for Nationalities（Natrual Science Edition），2006，32（1）：151-154. |
| 6 | 李建华.3DMine软件露天深孔台阶爆破管理应用实践[J].有色金属（矿山部分），2018，70（5）：66-69. |
| 6 | LiJianhua.Practice and application of 3DMine software in open-pit deep-hole bench blasting[J].Nonferrous Metals（Mining Section），2018，70（5）：66-69. |
| 7 | 王洋喆，郭忠林，史银卷，等.基于3DMine软件的不规则矿堆三维建模及矿量估算[J].中国钨业，2018，33（2）：64-68. |
| 7 | WangYangzhe，GuoZhonglin，ShiYinjuan，et al.Three-dimensional modeling and ore quantity estimation of irregular ore heap based on 3DMine[J].China Tungsten Industry，2018，33（2）：64-68. |
| 8 | 洪勇，张弛.基于3DMine的露天矿端帮境界剥采比研究[J].化工矿物与加工，2018，47（1）：48-51. |
| 8 | HongYong，ZhangChi.Study on end-slope boundary stripping ratio of surface mine based on 3DMine[J].Industrial Minerals and Processing，2018，47（1）：48-51. |
| 9 | 刘果，傅新华，张伟.基于3DMine的露天矿中长期计划应用研究[J].露天采矿技术，2013（8）：56-58. |
| 9 | LiuGuo，FuXinhua，ZhangWei.Study on application of medium and long term production planning establishment in Pingshuo east open-pit mine based on 3DMine[J].Opencast Mining Technology，2013（8）：56-58. |
| 10 | 王志宏，陈应显.露天矿三维可视化地质模型的实时动态更新[J].辽宁工程技术大学学报（自然科学版），2004，23（1）：21-23. |
| 10 | WangZhihong，ChenYingxian.Real time dynamic updating of 3D visualized geological model of open-cut mine[J].Journal of Liaoning Technical University（Natural Science Edition），2004，23（1）：21-23. |
| 11 | 冯兴隆，吴东旭，李剡兵，等.基于DIMINE三维数字矿山软件系统的淌塘铜矿六中段开采方法研究[J].湖南有色金属，2013，29（1）：1-6，53. |
| 11 | FengXinglong，WuDongxu，LiYanbing，et al.Mining method research of the sixth level of Tangtang Copper Mine based on DIMINE 3D mining software system[J].Hunan Nonferrous Metals，2013，29（1）：1-6，53. |
| 12 | 郭强.基于3DMine的三维矿山模拟研究[D].山西:太原理工大学,2012:40-50. |
| 12 | GuoQiang.Research on the -Dimensional mine simulation based on 3DMine[D].Shanxi：Taiyuan University of Technology,2012:40-50. |
| 13 | 于全景，张震宇.基于3DMINE软件的石灰石矿山三维建模[J].建筑工程技术与设计，2018（15）：4351. |
| 13 | YuQuanjing，ZhangZhenyu.3D Modeling of limestone mine based on 3DMINE software[J].Architectural Engineering Technology and Design，2018（15）：4351. |
| 14 | 杨金富，周仕雄，薛力鹏.基于DIMINE的会理拉拉铜矿三维地质建模及储量估算[J].金属矿山，2016，45（8）：114-118. |
| 14 | YangJinfu，ZhouShixiong，XueLipeng.Three-dimensional geological modeling and reserves estimation of Lala copper deposit in Huili County，based on DIMINE software[J].Metal Mine，2016，45（8）：114-118. |
| 15 | 高艳磊.基于3 DMine的露天采矿设计[J].金属矿山，2015，44（4）：255-258. |
| 15 | GaoYanlei.Design of 3DMine software in open pit mining[J].Metal Mine，2015，44（4）：255-258. |
| 16 | 邵亚建，饶运章，何少博.基于3DMine软件的复杂矿体三维建模及储量估算[J].有色金属科学与工程，2016，7（4）：98-102. |
| 16 | ShaoYajian，RaoYunzhang，HeShaobo.Three-dimensional modeling and reserve estimation of complex ore-body based on 3DMine[J].Nonferrous Metals Science and Engineering，2016，7（4）：98-102. |
| 17 | 王运森，闫腾飞，安龙.基于三维激光扫描的复杂空区点云处理技术研究[J].有色金属科学与工程，2015，6（2）：89-93. |
| 17 | WangYunsen，YanTengfei，AnLong.Point cloud processing technique of complex mined-out area based on 3D laser scanning[J].Nonferrous Metals Science and Engineering，2015，6（2）：89-93. |
| 18 | 巩瑞杰，陈彦亭，常龙新，等.基于3DMine的Web网页三维可视化插件设计与应用[J].现代矿业，2018（10）：142-145，150. |
| 18 | GongRuijie，ChenYanting，ChangLongxin，et al.Design and application of webpage three-dimensional visualization plug-in based on 3DMine[J].Modern Mining，2018（10）：142-145，150. |
| 19 | 于谦，杨继锋，李萌，等.3DMine矿业软件在数字矿山三维建模中的应用[J].河北遥感，2013（3）：9-11. |
| 19 | YuQian，YangJifeng，LiMeng，et al.Application of 3DMine mining software in 3D modeling of digital mine[J].Hebei Remote Sensing，2013（3）：9-11. |
| 20 | 曹玉涛，庞博，周正义，等.3DMine软件在矿山基建期间的应用[J].中国矿山工程，2018，47（3）：31-34. |
| 20 | CaoYutao，PangBo，ZhouZhengyi，et al.Application of 3DMine software in mine construction period[J].China Mine Engineering，2018，47（3）：31-34. |
| 21 | 罗周全，鹿浩，刘晓明，等.矿山三维实体建模[J].南华大学学报（自然科学版），2007，21（4）：9-15. |
| 21 | LuoZhouquan，LuHao，LiuXiaoming，et al.Mine 3D solid modeling[J].Journal of University of South China（Science and Technology），2007，21（4）：9-15. |
/
| 〈 |
|
〉 |