[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Gold Science and Technology >

2018 , Vol. 26 >Issue 5: 605 - 614

DOI: https://doi.org/10.11872/j.issn.1005-2518.2018.05.605

Study on Supporting Parametric Optimizing Design and Evaluate Supporting Effect of Deep Roadway in Jinchuan Mine

  • Guang LI 1, 2, 3 ,
  • Fengshan MA 1, 2 ,
  • Gang LIU 1, 2, 3 ,
  • Jie GUO 1, 2 ,
  • Huigao GUO 4 ,
  • Yongyuan KOU 4
Expand
  • 1 Key Laboratory of Shale Gas and Geoengineering，Institute of Geology and Geophysics，Chinese Academy of Sciences，Beijing 100029，China
  • 2 Institutions of Earth Science，Chinese Academy of Sciences，Beijing 100029，China
  • 3 University of Chinese Academy of Sciences，Beijing 100049，China
  • 4 Jinchuan Group Co.，Ltd.，Jinchang 737100，Gansu，China

Received date: 2018-07-31

  Revised date: 2018-09-23

  Online published: 2018-10-31

Fold

Highlights

The roadway support has always been a difficult problem in the mining engineering，especially in the deep soft rock roadway，whether it can provide endurable and effective support directly affects the safety production and sustainable development of the mine.The composite supporting scheme of double layer bolt-mesh-anchor and U-shaped steel is frequently used in the deep roadway in Jinchuan mining area.In order to evaluate the supporting effect of this scheme，a tentative roadway was setted up on the 814 m ramp in No.2 mine.Through the combination of field monitoring and numerical simulation calculation，the supporting effect was evaluated，and an improvement measure was put forward.The results show that：（1）Under the present supporting conditions，the surrounding rock in the roof and both sides of the roadway are well controlled，but the floor heave is serious with the maximum displacement reaching 110 cm.（2）In view of the defects of the current supporting scheme，reinforcement measures，ranging from increasing the length of bolt，improving the strength of anchor rod to supporting the floor，were put forward.（3）An optimization scheme was designed，and the numerical simulation results show that the optimized supporting method can control the deformation of roadway surrounding rock effectively and solve the problems of the previous scheme.

Cite this article

Guang LI , Fengshan MA , Gang LIU , Jie GUO , Huigao GUO , Yongyuan KOU . Study on Supporting Parametric Optimizing Design and Evaluate Supporting Effect of Deep Roadway in Jinchuan Mine[J]. Gold Science and Technology, 2018 , 26(5) : 605 -614 . DOI: 10.11872/j.issn.1005-2518.2018.05.605

[an error occurred while processing this directive]

References

Publishing order | Descend order by publishing year | Descend order by cited within
1
陈得信，陈仲杰. 喷锚网支护在金川高应力碎胀蠕变岩体中的应用及改进［J］. 金属矿山，2009，39（增）：407-411.

Chen Dexin ， Chen Zhongjie . Application of spray anchor net supporting in Jinchuan high-stress crack-expansion creep rock mass and its improvement［J］.Metal Mine，2009，39（Supp.）：407-411.

2
王小卫，高谦. 金川二矿区深部开采的关键技术问题与研究思路［J］.采矿技术，2002，2（2）：12-14.

Wang Xiaowei ，Gao Qian. Critical technical problems during the deep mining in the No.2 mining district in Jinchuan Corporation［J］.Mining Technology，2002，2（2）：12-14.

3
杨春丽，王永才. 金川矿区深部巷道支护方式优化数值模拟研究［J］.金属矿山，2008，38（3）：71-74.

Yang Chunli ， Wang Yongcai . Numerical simulation of deep roadway support optimization in Jinchuan mine area［J］.Metal Mine，2008，38（3）：71-74.

4
邓清海，马凤山，杨长祥，等. 金川二矿区14行风井返修支护效果分析[J].中国地质灾害与防治学报，2010，21（1）：81-86.

Deng Qinghai ， Ma Fengshan ， Yang Changxiang ，et al. Performance assessment of the supporting program of shaft No.14 in Jinchuan mine area No.2[J].The Chinese Journal of Geological Hazard and Control，2010，21（1）：81-86.

5
李欣，高谦，刘增辉，等. 金川Ⅲ矿区硐室围岩蠕变特性与支护时机［J］.北京科技大学学报，2011，33（10）：1182-1188.

Li Xin ， Gao Qian ， Liu Zenghui ，et al. Creep features of surrounding rock and supporting time for the chamber in Jinchuan Mine No.3［J］.Journal of University of Science and Technology Beijing，2011，33（10）：1182-1188.

6
赵小平，白本祥，高创州，等. 金川矿区深部巷道喷锚网支护参数研究［J］.金属矿山，2014，43（4）：35-38.

Zhao Xiaoping ， Bai Benxiang ， Gao Chuangzhou ，et al. Study on the spurting-bolt-mesh support parameter of deep roadway in Jinchuan mine area［J］.Metal Mine，2014，43（4）：35-38.

7
刘京铄，蒲成志，范金星，等. 深部巷道围岩松动圈厚度测试及支护体变形机制分析［J］.湖南工程学院学报（自然科学版），2015，25（2）：86-90.

Liu Jingshuo ， Pu Chengzhi ， Fan Jinxing ，et al. Test of relaxation-zone of surrounding rock on deep area and deformation mechanism analysis of supporting structure［J］.Journal of Hunan Institute of Engineering（Natural Science Edition），2015，25（2）：86-90.

8
高启波，贾琪. 高应力破碎岩体中巷道支护技术的应用与研究［J］.有色金属（矿山部分），2016，68（3）：70-74，82.

Gao Qibo ， Jia Qi . Application and research of the supporting technology in high-stress fractured rock roadway［J］.Nonferrous Metals（Mine Section），2016，68（3）：70-74，82.

9
吴大伟. 金川三矿区高地应力巷道支护技术研究[D].成都：西南科技大学，2016.

Wu Dawei . Research on Support Technology of High Ground Stress Roadway in Jinchuan No.3 Mining Area[D].Chengdu：Southwest University of Science and Technology，2016.

10
杨志强，高谦，王正辉. 预应力锚索支护参数优化研究及在金川二矿区的应用［J］.岩土力学，2008，29（5）：1361-1366.

Yang Zhiqiang ， Gao Qian ，Wang Zhenghui. Research on prestressed cable parameters optimization designs and its application to Jinchuan Mine No.2［J］.Rock and Soil Mechanics，2008，29（5）：1361-1366.

11
金川有色金属公司，北京有色设计研究总院. 中国—瑞典关于中国金川二矿区采矿技术合作岩石力学研究报告[R].金昌：金川有色金属公司，1988.

Jinchuan Non-ferrous Metal Company ，Beijing Central Engineering and Research Institute for Non-ferrous Metallurgical Industry. The research report on the technical cooperation rock mechanics between China and Sweden[R].Jinchang：Jinchuan Non-ferrous Metal Company，1988.

12
金川有色金属公司，中国岩石力学与工程学会金川分会. 金川镍矿开采的工程地质与岩石力学问题［M］.金昌：金川有色金属公司，1996.

Jinchuan Non-ferrous Metal Company ，Chinese Society of Rock MechanicsandEngineering. Engineering Geology and Rock Mechanics Problems in Jinchuan Nickel Mine[M].Jinchang：Jinchuan Non-ferrous Metal Company，1996.

13
康红普，王金华，林健. 煤矿巷道锚杆支护应用实例分析［J］.岩石力学与工程学报，2010，29（4）：649-664.

Kang Hongpu ， Wang Jinhua ， Lin Jian . Case studies of rock bolting in coal mine roadways［J］.Chinese Journal of Rock Mechanics and Engineering，2010，29（4）：649-664.

14
康红普，王金华，林健. 高预应力强力支护系统及其在深部巷道中的应用［J］.煤炭学报，2007，32（12）：1233-1238.

Kang Hongpu ， Wang Jinhua ， Lin Jian . High pretensioned stress and intensive bolting system and its application in deep roadways［J］.Journal of China Coal Society，2007，32（12）：1233-1238.

15
曹平，陈冲，张科，等. 金川矿山深部巷道围岩松动圈厚度测试与分析［J］.中南大学学报（自然科学版），2014，45（8）：2839-2844.

Cao Ping ， Chen Chong ， Zhang Ke ，et al. Measurement and analysis of deep roadway surrounding rock loose zone in Jinchuan mine［J］.Journal of Central South University （Science and Technology），2014，45（8）：2839-2844.

16
张鹏强，李凤，朱大铭. 金属矿山深部巷道稳定性测试与分析［J］.世界有色金属，2018，1（1）：157-159.

Zhang Pengqiang ， Li Feng ， Zhu Daming . Measurement and analysis of deep roadway stability in metal mine［J］.World Nonferrous Metals，2018，1（1）：157-159.

17
李光，马凤山，郭捷，等. U钢管混凝土支架支护技术在金川矿山的应用［J］.黄金科学技术，2017，25（5）：57-66.

Li Guang ， Ma Fengshan ， Guo Jie ，et al. Application of steel tube confined concrete support in Jinchuan mine［J］.Gold Science and Technology，2017，25（5）：57-66.

Options
Outlines

/

〈 〉

[an error occurred while processing this directive]