img

QQ群聊

img

官方微信

高级检索

J4 ›› 2005, Vol. 13 ›› Issue (6): 27-29.

• 矿产勘查 • 上一篇    下一篇

合理利用矿山井下充填加强地表开采保护

曹国荣   

  1. 兰州有色冶金设计研究院有限公司, 兰州   730000
  • 收稿日期:2005-07-02 修回日期:2005-07-13 出版日期:2005-12-30 发布日期:2011-11-09
  • 作者简介:曹国荣(1953-)男, 主要从事采矿设计与研究工作.

Reasonable Underground Filling Strengthening Surface Protection

CAO Guorong   

  1. Lanzhou Engineering & Research Institute of Nonferrous Metallurgy Co., Ltd., Lanzhou 730000, China
  • Received:2005-07-02 Revised:2005-07-13 Online:2005-12-30 Published:2011-11-09

摘要:

通过分析矿山井下充填与地表开采保护状况, 提出了应当从技术经济角度出发, 综合考虑选用矿山井下充填与地表开采保护措施的观点。

关键词: 矿山充填, 地表保护, 充填采矿法

Abstract:

Based on the analysis of some relevant aspects of filling stopes method, the paper thinks
some effectivemeasures, for example, reasonable underground filling useful to the surface protection, should be taken from the techno-economic point of view.

Key words: mine-filling, surface protection, filling stopes method

中图分类号: 

  • TD853.34
[1] 董金奎,申延,邱俊刚. 焦家金矿寺庄矿区岩体节理裂隙调查与矿岩稳定性分析[J]. J4, 2012, 20(2): 58-61.
[2] 曹英莉, 秦秀合, 张瑞忠, 高金成. 夏甸金矿水平分层进路式尾砂充填采矿法的研究与应用[J]. J4, 2012, 20(2): 62-66.
[3] 王大为,王卓,李磊,李伟宁,秦伟利,刘洪伟,李伟国. 上向水平扇形进路采矿方法的研究及应用[J]. J4, 2012, 20(2): 67-70.
[4] 刘福江,王元魁,王振军,魏开林,武志明. 提高多节理裂隙矿岩爆破质量的探讨[J]. J4, 2012, 20(2): 71-73.
[5] 白复锌,张永林,张彬. 鑫汇金矿的非胶结充填连续采矿技术[J]. J4, 2008, 16(4): 66-69.
[6] 陈宏兵, 王永成, 胡世利. 高水固结尾砂充填工艺的充填材料及用量计算[J]. J4, 2007, 15(3): 58-61.
[7] 陈华珍, 孙涛, 宋长葆. 新型尾砂胶结材料在应用中的几个问题[J]. J4, 2006, 14(1): 32-35.
[8] 牟振山, 刘学胜, 李和平, 薛田喜. 注浆胶结矿柱充填工艺在河西金矿的研究[J]. J4, 2006, 14(3): 22-25.
[9] 李兴尚,郭忠林. 废石充填采矿法在新桥矿的实践[J]. J4, 2004, 12(2): 41-45.
[10] 刘学胜, 薛田喜, 王秀娟. 模板隔离槽充填工艺的研究[J]. J4, 2004, 12(1): 5-7.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!